Feature(may vary by option.)
●External Snap Ring Set: Snap rings, also called retaining rings. The three prongs of the E-ring contact the bottom of the groove to provide a shoulder for effective retention of the component. Thus providing a larger retaining area.
●E Clip Assortment: E-ring is a circlip that can be easily pushed in or removed from the side without any shaft moving tools. Includes 13 sizes of replacement external retaining rings for a variety of securing tasks indoors or out. Sizes: 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 15mm.
●Multipurpose: E-ring circlip rings are widely used in machinery, from simple hand tools to complex aircraft. Such as retention of bearings, gears, pulleys etc. Good for pros and hobbyists due to their ease of installation and removal.
●Metal Snap Rings: E-clip external retaining rings are made of heat-treated, hardened steel with long-lasting. The rings are concavely designed to provide spring-like retention for a tight fit to limit loosening due to rapid movement.
●All 395 standard-size locking clips are packed in a sturdy and transparent plastic box, Its conveniently stored and organized. With corresponding size labels on the storage box for easy identification while working.
[E-Clip 304 Stainless Steel]
[E-Clip Carbon Steel (395 pcs)]
Description
Additional benefits of using E-clip include the ease of pressing them into machined grooves without the use of special tools.
The three prongs of the E-ring contact the bottom of the groove to provide a shoulder for effective retention of the component.
Unlike snap rings, which must be slid along the axis of a shaft or rod to remove, E-rings are easily removed from the side without any shaft movement.
These retaining rings are widely used in machinery, from simple hand tools to complex aircraft.
They’re also commonly used in transit and railway systems because they offer the advantage of easy installation and removal.
Overall, there are a variety of E-clip sizes and types depending on the application. Correct sizing is important for circlips.
NINDEJIN 395pcs High Quality Carbon Steel Snap E-clip Circle Retaining Rings Assortment Kit
|
|
|
|
|---|---|---|
|
PREMIUM QUALITY - These E-clip external retaining rings are made of durable carbon steel with a black oxide finish, providing high hardness, high strength and long service life. |
RETAINING METAL CLIPS: E-clips are E-shaped fasteners (Mechanical Fasteners) with 1 side opened to hold parts onto a shaft with a wider shoulder. Standard thickness with excellent holding strongly capacity. |
MEET YOUR NEED - This snap retaining ring set is contains 13 popular sizes (1.2mm,1.5mm,2mm,2.5mm,3mm,4mm,5mm,6mm,7mm,8mm,10mm,12mm,15mm) that you can use for different purposes and projects. |
Specifiations:
- Material: High Carbon steel
- Package: 395Pcs E-clip Retaining Rings
- Size (Metric) : 13 popular sizes
E-clips with 1 side opened to hold parts onto a shaft with a wider shoulder, thus providing a larger retaining area and yielding higher thrust load capacity.
However, if too tight, it could also damage the shaft or affect the performance of the assembly.
E-clip retaining rings Kit
Easy to use. It can be pushed on or off the slotted shaft without special tools
Installation
E-rings are designed to "snap into" grooves on round shafts. Locate the groove, place the two open ends of the E against it and push.
Removal
To remove an e-clip, use either a removal tool, needle-nose pliers, or a small flat-bladed screwdriver. Grab the E-clip with your tool and push it up with moderate pressure. E-clips can be easily removed with another household tool.
