Feature(may vary by option.)

●Grid Tie Inverter MPPT Range 15.5-23V【DO NOT use solar controller load ports to connect to the inverter.This is On Grid. The AC output needs to be connected to the grid.】
●Vmp(of a solar panel) must be in the MPPT range to ensure the good output efficiency【Red / green lights flash alternating. This is the solar panel power or voltage is too low】
●200W-1000W Solar Panel:Vmp: 18-21V, Voc: 20-24V【Please do not use other voltage input, for example: (10.8V-15V)and (25-30V)】The DC positive and negative connections are reversed, and the inverter Led will not light up.
●Micro Grid Tie Inverter Doesnt work with 12V battery【Each time you move the inverter, tighten the DC connection terminals. Avoid short circuit of DC terminal due to loose connection】
●Micro Inverter Max Power Point Tracking and Stackable,Island Protection. If the DC connection is loose and causes a short circuit, then smoke may be emitted.The inverter adopts aluminum alloy casing, so there is no fire.
●Please note: Do not use it together with a bidirectional meter in the local power grid. This is because the excess power from the inverter will be fed back into the grid, resulting in increased electricity costs. For a bidirectional power grid, we recommend using our SUN-Inverter series.

[12V Solar Panel Voc20-24V]

Description

Specifications

AC Output Power:1000W;
Maximum AC Output Power:1100W
AC Output Voltage: 90V-140V
DC Input: 10.8V-30V
Frequency Range: 48Hz ~ 62Hz
MPPT Range 15.5-23V.
Solar Panel Voltage: Vmp18-21V; Voc20-24V
Solar Panel Ppower: minimum 200W, maximum 1100W

Package include:
1XGrid Tie Inverter
1 x Power Cord(US)
1 x English Users Manaul

Start DIY your solar system. Reduce your electricity bill.

1000W Grid tie inverter , Pure Sine Wave Inverter
DC10.8V-30V to AC90-140V Output.
18V Solar Panel,Vmp: 18-21V, Voc: 20-24V

1000W Grid Tie inverter is a compact unit,which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid.The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid.

Please be noted, This grid tie inverter cannot be used as off grid/stand alone solar system. The output need to be connected to the grid power. Can not supply power directly to the AC loads.
DO NOT use solar controller load ports to connect to the inverter
Some buyers may have concerns about the output power not reach their expectations. Here is the reason.
This unit was ideally designed for a 18V solar panel If using 12v battery as input, the inverter will not reach its max power point.
We will suggest using 24v battery as input source to get a better output power.
Use a battery to power the inverter, please use a circuit breaker.

How to DIY Grid Tie Inverter Solar System?

DC10.8-30V version.

1: Please check the power of your solar panel, the power cannot be lower than 200W

2: Please check your solar panel voltage, open circuit voltage 20-24V (Voc)

3: Note: Please use solar panels with the same specifications

DC Input

Easy to install, DC connect your solar panel (red terminals connect "+", black terminals connect "-")

Note 1: Do not connect the positive and negative poles. The LED will not light up.

Note 2: Please tighten the DC end of the inverter. Avoid loosening and short circuits.

AC output

The AC cord to the inverter 3 foot outlet, then the AC cord to home 3 pin AC outlet.The switch of the home outlet must be turned on.

Note 1: The local power grid must be normal. In case of power failure, the inverter will automatically stop working (island protection)

Note 2: The household outlet switch must be turned on. Otherwise, the inverter cannot be synchronized to the grid.

Stackable Connection

The purpose is let small power inverter become high-power inverter.

In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid tie inverter 1000W of stack used is equal to 4000W, and the number of open stacks (No Quantitative Restrictions).


MPPT technology Creative MPPT tech makes efficiency higher than 99%. Peak conversion 80%. Consider the conversion rate of solar panel is about 80%, for example, if you need 500W power output from the inverter, you need to connect it to a solar panel that 500 / 0.8 / 0.8 equals about 780W, (780w * 0.8 * 0.8 = 500w)	Multiple protections Islanding; Short-circuit; converse connection; Low Voltage; Over Voltage; Over temperature Protection	Fan Cooling Intelligence Fan-on temperature >45℃ and off < 40℃. High-speed ventilation fans to help keep the inverter running at a low temperature.

The inverter stopped working after 1 week. The same problem continued to occur after replacing the inverter. why?

The DC input voltage is wrong. Too high/too low voltage damages the inverter. For example: DC10.8-30V version, you will think that 10.8-30V will make the inverter work. So ignore the voltage required by our instructions (Solar Panel Voltage: Vmp18-21V; Voc20-24V)

10.8V/30V is not the working voltage? Why should the advertisement display DC10.8-30V?

Y&H grid tie inverter is designed for solar panels. The working voltage of solar panels depends on the intensity of sunlight, which means that the panel voltage varies. There is also an increase in the voltage at the moment the solar panel starts.

When you use a 12V solar panel, the working voltage of the panel is 18V-21V. But the moment of starting is to reach 24V or higher. We design 30V to buffer the instantaneous voltage at startup.

When the sun is weak. The panel voltage drops from 18V to 17V, 16V, 15V... 10.8V. We design compatible wide voltage input in order to obtain more power output. Of course, as the panel voltage decreases, the inverter output efficiency will decrease.

Put another way. DC10.8-30V input, the actual starting voltage is 15.5V. After starting. The lowest tracking voltage can reach 10.8V. This is the additional power obtained. Can be ignored. The main power acquisition is that the panel voltage is 18V-21V (when the sun is strong)


	GTI-1000W-18V-110V-S	GTI-1000W-36V-110V-S	GTI-600W-18V-110V-S	SY-GWV-600W-110V-B	SUN-1000GTIL2-M
				See Details
Customer Reviews	402	402	196	402	124
Price	$122.99	$119.99	$89.99	—	$339.99
solar panel input	for 12V Solar Panel Voc20-24V	for 24V Solar Panel Voc38-46V	for 12V Solar Panel Voc20-24V	for 24V Solar Panel Voc38-46V	for Voc 38-60V
battery input	24V	36V	24V	36V	36V/48V
AC connected to the grid	✓	✓	✓	✓	✓
AC output	90-140V	90-140V	90-140V	90-140V	110V/220V Auto
limiter function	N/A	N/A	N/A	N/A	✓
WIFI communication	N/A	N/A	N/A	N/A	Need to buy wifi accessories
Stackable Connection	✓	✓	✓	✓	✓

Specifications

Start DIY your solar system. Reduce your electricity bill.

How to DIY Grid Tie Inverter Solar System?

DC Input

AC output

Stackable Connection

MPPT technology

Multiple protections

Fan Cooling

The inverter stopped working after 1 week. The same problem continued to occur after replacing the inverter. why?

Product information