Shows "LOW VOLTAGE" | 1. Recharge the battery and check the connection whether secure; 2. Use proper cable length and gauge. (Refer instructions at Page 12); 3. Charge or replace the battery |
Shows "HIGH VOLTAGE" | 1. Make sure the inverter is connected to 12V battery |
Shows "OVERLOAD" | 1. Make sure the load attached to the inverter is within the operating limit |
Shows “Thermometers” | 1. Make sure the inverter is placed in well-ventilated area and ventilation openings are not obstructed; 2. Reduce the ambient temperature if possible.(Refer technical specifications) |
No Output Voltage(Indication) | 1. Turn ON the inverter; 2. Check the wiring to the inverter; 3. Reverse DC polarity will damage the inverter. Have a qualified service technician to repair |