Feature(may vary by option.)

●Made in the USA. Solid Carbide.
●Benefits of Zirconium Nitride (ZrN) Coating Creates a harder and tougher cutting edge allows for a prolonged cutting edge life.
●Helps to prevent the build-up of material in the flutes while cutting Have the tendency to run/spin much faster than an uncoated tool.
●Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding.
●Reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).

[6 D x 38 CH x 6 SHK]

[1.5 D x 25 CH x 6 SHK]

[1mm Dia x 0.5mm]

[0.5 D x 26.5 CH x 6 SHK]

[0.8 D x 25 CH x 6 SHK]

[3.2 D x 38 CH x 6 SHK]

Description

Specially designed for 2D and 3D CNC profiling and carving in plastic, aluminum & wood with CNC machines. The high-shear ball nose tips cut Smooth 2D and 3D contours with reduced stepping while the proprietary ZRN coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction and heat buildup. Some of Amana Tool carving tools, as you can appreciate have a very small diameter therefore any material chip-loads need to reflect that small size. It can however withstand RPM up to 60, 000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome. Tools are manufactured with high balance that allows them to run up to 60, 000 RPMs. Adjust your chip load and feed rate accordingly., #46473, (D) diameter 0.5mm, (R) radius 0.25mm, (a°) angle 6.2°, (b) Cutting height 26.5mm, (D) shank 6mm, Overall Length (L) 75mm, type ball nose, ZRN, flutes 3, 46473 CNC 2D and 3D carving 6.2 deg tapered angle ball tip x 0.5mm dia x 0.25mm radius x 26.5mm x 6mm Shank x 75mm long x 3 flute Up-cut spiral solid carbide ZRN coated