Feature

●PRACTICAL USE: The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system which can also be used on commercially available angle grinders.
●INNOVATIVE GEOMETRY: The unique geometry of the cooling slots ensures high airflow, significantly reducing the thermal load on the abrasive material and the workpiece.
●IMPROVED PERFORMANCE: Compared to conventional tools, better performance is achieved due to the quick-clamping system, robust holder, secure tool locking, and integrated cooling system.
●SIMPLE USE: Ideal for highly productive work that saves resources and achieves excellent results. Disc swapping and setup time is reduced by the quick-mounting system.
●INCLUDED: 1 x PFERD COMBILICK backing pad, medium hardness | thread size 5/8-11" | dia. 4-1/2" and 5" | max RPM 13300 | economical and efficient due to minimum tool change times | EDP 69470


Description

PFERD COMBICLICK backing pad, 1 pc. (EDP 69470) // This type is mainly used for work on stainless steel (INOX). It has a very high edge strength, enabling a higher contact pressure. With this packing pad, COMBICLICK tools can be used on commercially available angle grinders. The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system. The unique geometry of the cooling slots ensures high airflow which considerably reduces the thermal load on the abrasive material and the workpiece. Compared to conventional tools, the quick-mounting system, robust holder, secure tool-locking feature, and integrated cooling system all together achieve up to a 30% lower workpiece temperature, up to a 25% higher stock removal rate, up to a 30% longer service life, and better utilization of the abrasive material. // Choose the COMBILICK for efficient work with this highly efficient patented quick-mounted system. Choose the COMBICLICK as an innovative solution to sustainably reduce the viration, noise, and dust produced during use. Improved comfort. The maximum permitted peripheral speed is 15,800 SFPM. For safety reasons, the maximum permitted rotational speed indicated must never be exceeded. // COMBICLICK backing pad dia. for 4-1/2 and 5 inch diameter and 5/8-11 thread for angle grinders.