Feature

●4X PCIE 6 SATA 3.0 --- This PCIE SATA card can connect 6 mass storage devices at the same time, provides 6 SATA cables, with a transmission speed of up to 6Gbps. Supply power to 4 SATA interface hard disks or optical drives at the same time.
●POWERFUL CHIP --- Maximize your efficiency, stabilize your performance, and reduce error rate with ASM1166 chip. Also, maximize the effect of heat dissipation with a Heat-Sink.
●CAMPABILITY --- Compatible with WIN8.x / WIN10 / Windows Server 2008R2 / 2012/2016/2019 / Linux 2.6.xto 4.x. The PCIE SATA card is compatible with PCIE X4, X8, X16 slots, it does not apply to PCI-E 1X and PCI slots. Hard RAID mode is not supported. It can only support soft RAID.
●PACKAGE LIST --- The PCIE SATA card contains 6 SATA cables and 1 SATA to 4 SATA 15-pin power distribution cable (for connecting the computer power supply to serial ATA hard drives, SSDs, optical drives, DVD burners, and PCIE cards).
●CUSTOMER SERVICE --- We strive to provide premium product and service, our products have been tested for function and durability, if you have any questions, please feel free to contact us, we will reply you within 24 hours.


Description

Specifications:

Supports hot swap.

PCI-E requires a slot higher than V2.0.

For V1.0, the speed will not exceed 250 M.

Supports FIS based on port multiplier switch or command switch.

Supports AHCI1.0 mode and IDE mode Supports native command queue (NCQ)

Supports communication speeds of 6.0 Gbit / s, 3.0 Gbit / s, 1.5 Gbit / s Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.

Regardless of whether PCI-E is 4x or 16x, you can put it directly into the free 16x slot, provided it is the V2.0 version. It does not support PCI-E 1x.

Conforms to serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Follow PCI- Express v2 .0 specification and backward compatible with PCI-Express v1.0.

Compatible with SATA6G, 3G and 1.5G hard drives PCIE 3.0 SATA Controller Solution About the Speed Description The best effect can be achieved with SATA3.0 data cable.

The motherboard setting BOIS:

SATA mode must be changed to AHCI.

Different computer configurations and SATA SSDs have different speeds.

The maximum speed of PCI-E 2.0 is 380-450 m/s. When connected to PCI-E1.0, the speed is only 200-300 m / s.

Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high-speed mode, which must be enabled manually.

Package List:

1x PCI-E 4X to 6portrs SATA card

1x Low profile bracket

1x Power cable

6x SATA cables