Feature
●★Features - Using High-quality steel, high hardness quenching rigid and long service life; carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads.
●★Design - Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
●★Sizes - 3/8"-18 NPT. Equipped with special storage box.
●★Usage - Used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.
●★Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Description
- Type: Straight Fluted
- Measurement: Metric
- Accuracy Class: H2
- Material: HSS 6542 NPT
About This Tap:
Product Information:
Hardened HSS6542 material
Full grinding process
This product adopts a special sharpening process, good wear resistance and heat resistance.The surface hardness is as high as 55-66 degrees.
Large chip flute design
Smooth cutting and good chip removal
Instructions for use
1.Before tapping, confirm whether the diameter of the round hole is appropriate. If the hole is too small for tapping, the tap will wear out more unnecessary, which will increase the risk of tap breakage.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss.
3. When the tap is working, if it encounters difficulty in rotation, the tapping should be suspended. Check the hole diameter and material again, and increase the cooling to reduce the risk of tap damage.
4. Please be sure to take protective measures when working, and you need to wear goggles and protective gloves.
|
|
|
|
|---|---|---|
Suit for Most MetalsThis thread tap can process copper, brass, A3 steel, aluminum, cast iron and other materials. When operating, control the speed according to the hardness of the material, the higher the hardness of the processed product, the slower the speed. |
Straight Fluted TapStraight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay attention to not being used for blind hole tapping. |
Scope of ApplicationGenerally using this product for tapping, it can be used with manual equipment or special processing consoles,such astapping machines, integrated bench drills, CNC lathes, machining centers, etc. |
