Feature

●[Specification] Replaces Part Numbers:20008, 17-20008, 20018. Valve Hole Dia Size : 0.453"(11.5mm), Length: 2.2" long (effetive length).Max Inflation Pressure: 65 PSI.
●[High-quality] These TPMS tire valve stems are made of high-quality rubber, brass stems, with a black surface.Bringing a stylish new appearance to your wheels and helping to maintain tire inflation.100% Ozone tested and leak tested, providing a safe tire system.
●[Easy to Install] Deflate the tire and remove it from the rim, insert a new valve stem from the inside of the rim until it clicks into place.These rubber tire valve stems are designed with bolts, installation is very simple and convenient.
●[Application]Compatible with Ford, Chevy, Dodge, Chrysle, Buick, Ram, Cadillac, Pontiac, Subaru, Lincoln.Please browse the product description to confirm the model and year
●[You will get] 100PCS TPMS 17-20008 Tire Valve Stem.If you have any questions while using it, please feel free to contact us and send an email to us. We will provide you with satisfactory service.


Description

TPMS 20008 Rubber Snap-in Tire Valve StemsTPMS 20008 Rubber Snap-in Tire Valve Stems
11

TPMS 20008 Rubber Snap-in Tire Valve Stems

Fit for most car.for example: GM,CHEVY,FORD,SUBURA,JEEP,DODGE,CHRYSLER,ect.(Please see below applicable models)

Installation steps

STEP 1

  • Please verify our valve nozzles match your sensors, and use a suitable vale mounting tool to insert the valve stem through the valve hole of the rim.

STEP 2

  • Assemble the sensor and valve stem together by screw.

STEP 3

  • Drive the nut onto the stem and use the appropriate torgue wrench to fully tighten the nut.

specification

  • Material: Rubber & Pure copper
  • Color: Black
  • Replaces Part Numbers:20008, 17-20008, 20018
  • Valve Hole Dia Size : 0.453"(11.5mm)
  • Length: 2.25" long (effetive length)
  • Max Inflation Pressure: 65 PSI.
  • Quanity:100× TPMS Tire valve stems
11
11
11

Product information