Feature

●Replace Part: 426-02-063-0001 426-02-063-0002, Use on 14" band saws and 24" scroll saws
●Compatible With Delta & Rockwell &Grizzly14" bandsaws has slightly smaller holes for the throat plate, Make sure your insert recess has the locating pin on the side, not on the rear.
●Installation Note: First make sure the edges of the holes are free of dirt. If the table alignment pins are not tight or are missing, usually the blade mounting slots will close up a bit over time, which slightly reduces the diameter of the insertion holes. I tap a flathead screwdriver into the blade mounting slot a bit to wedge it open. This should diffuse the insert hole enough to fit it.
●Our goal is to give users a good shopping experience, if you have any problems in shopping and use, please email us in time, our staff will help you solve within 24 hours.


Description

Installation Note: First make sure the edges of the holes are free of dirt. If the table alignment pins are not tight or are missing, usually the blade mounting slots will close up a bit over time, which slightly reduces the diameter of the insertion holes. I tap a flathead screwdriver into the blade mounting slot a bit to wedge it open. This should diffuse the insert hole enough to fit it.