Feature(may vary by option.)

●[Premium Material] The patches are made from multiple layers of PVC and stainless steel 304, corrosion resistance, Light weight and stronger adsorption and durability in the saltwater environment. . Rubber elastic bungee rope, soft and abrasion resistant with high breaking strength and UV resistance.
●[D-Ring Patches Bungee Kit] Add extra tie-down points to your inflatable SUP surfboard or other PVC coated boat or gear with these reinforced PVC D-Ring patches that help secure rope, cargo, paddles or other item, or attach fix kayak seat.
●[Wide Range of Applications] Suitable for PVC inflatable boat, rafts, dinghy, kayaks, canoes, surfboards, stand up paddle boards, etc.; for rescue ropes, bailer, cargo, thigh straps.
●[Upgraded SUP D-Ring Patch] Compared with other D-Ring pad on the market, you can get 6pcs PVC D Ring Patches ( 3.54" ). 8.5ft Elastic Bungee Shock Cord,6pcs Bungee Hooks, 1 free handles replacement. (Glue not Included in the package).
●[Note] There is no glue on the back of the D-ring patch, please rough up the back and clean with solvent before gluing and taping to ensure best results (glue is not included in the package).

[9cm Orange]

[9cm Gray]

[9cm White]

[9cm Black]

[9cm Cyan]

Description

Our kayak accessories are suitable for PVC inflatable boats, rafts, dinghies, kayaks, canoes, SUPs, surfboards, and have a wide range of applications. D-ring pad/patch is easy to use, strong adhesion, you dont have to worry about falling off. Make it easier to tie equipment to a raft or canoe or add grabbing lines to ensure safety.

How to Use:

1. Inflate your boat and thoroughly clean the area where you need to install D-rings. You may use a mild detergent to clean the area. Make sure to completely dry the area after you clean it.

2. Position the D-ring patch on this area and using a ballpoint pen trace the outline of the patch on the boat. Angle the pen inward a bit so that the patch covers the trace mark later.

3. Apply a thin layer of glue on the D-ring patch and the on boat with in the trace mark. Make sure that the glue is evenly spread on both the surfaces, no air bubbles.

4. Allow the glue to become tacky for about 10 minutes.

5. Put some heavy object of about 5-7 lbs. weight on the patch and allow it to dry for about 10-12 hours.

6. Recommended glue:PVC Stitch and Rh Adhesives.

Packing List:

6 x Stainless steel D rings Pad PVC Patch Patches

1 x Elastic Shock Cord

6 x Elastic Rope cord Hooks