Feature

●MUST HAVE FOR BALL JOINT SERVICE - Ball Joint Press kit Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle. Great to be used in conjunction with Ball Joint Separator Tool
●PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the kit because we sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
●COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
●CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Grab and Go Ballpoint Press Kit can be taken Easily with you or keep in your Shop
●KIT INCLUDES - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11? x 3? x 15? inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup


Description

Ball Joint Press U-Joint UJoint Press Install Uninstall KitBall Joint Press U-Joint UJoint Press Install Uninstall Kit

Auto Parts Prodigy Ball Joint Tool with 4-wheel Drive Adapters is a heavy duty forged steel tool and set that is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins, even removing rusted and corroded parts. This set contains a C-frame press, 3 receiver tubes sizes: 2-3/4"x3", 2-1/4"x 2-1/2" & 1-3/4"x2", installation and removing adapters. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).

  • This heavy duty tool set is excellent for removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins
  • It will remove even rusted and corroded parts
  • Set contains C-frame press, 3 receiver tubes sizes: 2-3/4""x3"", 2-1/4""x 2-1/2"" & 1-3/4""x2"", installation and removing adapters
  • Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
  • Blow molded case for easy storage and transport
  • Case Dimensions: (L)16-1/2"" x (W)10” x (H)3""
  • Net Weight: 7-1/2lbs. (7.89kg)

Instructions

Install Remove Ball JointInstall Remove Ball Joint

Install Remove Brake Anchor PinInstall Remove Brake Anchor Pin

Install Remove UJoint U-Joint U JointInstall Remove UJoint U-Joint U Joint

Install / Remove a Ball Joint

  1. Assemble the Ball Joint Press over the vehicles control arm. Select the correct size Receiving Tube, and position it under the vehicles ball joint.
  2. Place the Removal Adapter between the Receiving Tube and the Jackscrew.
  3. Then, place the Installation Adapter between the top of the ball joint and the Ball Joint Press.
  4. Tighten the Jackscrew until the Receiving Tube contacts the vehicles control arm.
  5. Check the alignment of all the Ball Joint Kit parts, and continue tightening the Jackscrew until the vehicles ball joint is removed.

Remove / Install Brake Anchor Pins

  1. To remove the brake anchor pins, remove all lock ring retainers from the Brake Anchor Pins. Position the Ball Joint Press over the brake spider.
  2. Tighten the Jackscrew until the anchor pins can be removed.
  3. To install the brake anchor pins, insert the brake anchor pins. Then reinstall the lock ring retainers on the brake anchor pin.
  4. Unscrew and remove the Ball Joint Press.

  1. To disassemble a "U" joint, remove any external and/or internal lock rings. Position the Ball Joint Press around the drive shaft yoke and tighten the Jackscrew until the first bearing is removed.
  2. Reposition the Ball Joint Press and remove the second bearing. To assemble a "U" joint, clean all dirt and oil from the yoke area.
  3. Align the replacement bearing and Ball Joint Press as straight as possible over the yoke. Press the replacement bearing into the yoke, and reassemble the external/internal lock ring.
  4. Reposition the Ball Joint Press and second replacement bearing as straight as possible over the yoke, and press the bearing into the yoke. Reassemble the external/internal lock ring.

Auto Parts Prodigy - Outstanding Service and Great Prices

Radiator Pressure Tester AutomobileRadiator Pressure Tester Automobile

Radiator Coolant FillerRadiator Coolant Filler

United States Based CompanyUnited States Based Company

Built For Professionals

  • Our Products are tried and true out in the field by many technicians.

Strick Quality Control

  • Products are reviewed to ensure low defect rates

US Based Small Business

  • We are are US Small Business. Your purchases help a local New York Family.

Product information