Feature

●4. ACTIVATION & DIPPING - Lay the film in the water. Make the side Remove creases/folds or underneath the print by blowing it lightly. Wait 60-80 seconds activating it. Spray the activator as as much as possible and without too much disturbance on the water. properly activated, submerge your subject by into the water on an angle to avoid trapping .
●3. PAINTING THE BASECOLOR - Paint your preferred basecolor. Most of the patterns are transparent so it a color of would greatly affect your overall output.
●2. PRIMER PAINT - Use the appropriate primer for your substrate. It may whether a metal, plastic, fiberglass, ceramic or wood. your local paint shop for the best option with your market .
●1. PREPARATION - Make the item has been stripped of grease, dirt and gunks and other stuff that may interfere with the adhesion of . Durability of any hydrographics coat depends complete and careful preparation of the surface painting. The surface should be even and . Any cracks, and holes or any other imperfections do not let the paint adhere correctly to the surface. Inadequate surface preparation results into majority of failures.
●5. WASH - Wash your dipped item using a running water to the residues left by the print and let it dry for a while.


Description

6. CLEARCOAT - Spray the clearcoat to your print and item dry. It would be whether a gloss, a semi-gloss, or a flat finish.
Usage: Use to water printing technology.
Hydrographics or HydroGraphics, also known as immersion printing, water printing, water imaging, hydro dipping, watermarbling or printing, is a of applying to three-dimensional surfaces. The resulting combinations may be considered decorative art or applied art. The hydrographic process can be used on metal, plastic, glass, hard , and various other materials.
size:Applique 50cmx100cm, thickness is about 0.03mm
Material:PVA
colour:Multicolor

Package Contents:
1 x Water hydrodipping film

Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.