Feature(may vary by option.)
●Color: Blue, Material: Metal, Stainless Steel, Voltage: 110V-240V, Power (Cutting Pen): 30W, Power (Power Adapter): 30W, Plug: US plug, DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch, Metal Pen Length: 25CM / 9.84 Inch, Total Length: 40CM /15.75 Inch, Packing List: 1 x Foam Cutting Pen, 1 x Start Switch, Power Adapter
●Advantage: The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds. Non-slip Insulating Rubber Handle: The non-slip rubber handle and the electric heating pen are lightweight, so your hands will not be tired after a long time of cutting work. The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments.
●Instruction: Step 1. Connect and switch on the power adapter. Step 2. Turn the switch on and wait for the temperature to rise to the usage temperature. Step 3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut. Step4. After cutting, turn off the switch and wait for the foam cutter to cool down. (Recommended to rest for more than half an hour after 30 minutes of use.)
●Application: It can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for small craft model making, advertising font production, DIY hand model making, etc.
●NOTE: The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.
[15CM]
[25CM]
[10CM]
[20CM]
[5CM]
Description
The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc.
Specification
Color: Blue
Material: Metal, Stainless Steel
Voltage: 110V-240V
Power (Cutting Pen): 30W
Power (Power Adapter): 30W
Plug: US plug
DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch
Metal Pen Length: 25CM / 9.84 Inch
Total Length: 40CM /15.75 Inch
Packing List: 1 x Foam Cutting Pen, 1 x Start Switch, Power Adapter
Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.