Suggestion：

1. Store in a cool place.

2. Before use, please read the instructions carefully and try a little to master the trial skills and techniques.

3. Do not touch the skin directly and wear protective gloves when using.

4. The surface must be kept clean and dry when bonding.

5. UV resin curing needs to be completed under ultraviolet, please use special UV light.

6. Do not touch with your hand immediately after UV light irradiation, touch after curing and cooling, to avoid scalding and leaving traces.

About Curing

1.Curing time is affected by factors such as UV intensity, added colorant,amount of adhesive and temperature.The specific curing time is subject to actual operation;

2.Add dye or powder to the UV resin and mix it well in other containers before pouring it into the mold being made so that it cures better;

3.The thickness of the mold is relatively large, pour into the mold slowly in several times, curing in turn;

4. After the front side of the mold is cured for 30-60s, then the reverse side is cured for 30-60s.

This uv resin cures totally clear and very hard.