Feature(may vary by option.)
●[Automatic Welding Mode] The spot welder dent puller can be switched to automatic control technology for automatic control of the current level, resulting in faster and more precise welding tasks.
●[7 Welding Modes] 1,Triangular Meson Pull; 2,Round Gasket Welding; 3,Long Gasket Welding; 4,Wave Line Welding, 5,Stud Welding; 6,Carbon Rod To Close The Fire; 7,Single- Sided Spot Welding.
●[10 Power Levels] The power output is a key factor in welding and should be adjusted according to the thickness of the material to be welded.
●[Smaller Spot Welds] Spot welders have a thickness of 0.024 to 0.047"/0.6 to 1.2mm on one side of the weld, which is smaller and ensures no damage to the backside metal coatings or painted surfaces.
●[Thermal Protection System] The Weld Dent Remover is equipped with a heat sink on the side of the machine that will activate at 203°F/95°C to prevent potential short circuits and machine burnout
●[Upgraded Transformer] The current range of the transformer determines the size and tension of the weld joints in the sheet metal repair machine, which affects the quality of the repair and the efficiency of the work. Our spot welder dent puller is designed with a transformer that has low no-load current, low failure rate and high power factor.
●[Packing List] We provide a portable tool kit with all the accessories of this equipment, the accessories include 1x main unit; 1x weld puller; 1x dent puller; 1x manual suction cup; 1x dual-purpose dielectric head; 1x six-jawed hook; 1x wrench; 1x round washer chuck; 1x pulling hook; 1x connector; 1x carbon rod connector; 2x carbon rods; 10 x triangular straight puller tabs; 10 x corrugated wire; 20 x Circular Washers; 20 x OT Spacers; 1x User Manual.
[110V | 3KW]
Description
