![Car Dent Repair Kit](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
How to Repair the Dents?
1. Clean the damaged surface with a clean wet cloth.
2. Insert the glue stick into the glue gun, then heat it for about 3-5 minutes.
3. Choose the suitable glue tab and apply hot melt glue on it.
4. Put the tab on the dent, hold on, and wait for a minute until the hot melt adhesive sets.
5. Use a dent lifter or bridge dent puller to align and press the puller to pull up the dent. Repeat the above steps until the dent pops up.
6. Spray 75% rubbing alcohol all over the residual glue, wait for 1-3 minutes. Then remove the glue with a plastic shove.
7. If there are still small and irregular dents, please tap lightly with a rubber hammer and a tap-down pen.
8. Repeat the above steps until the dent is repaired.