Feature
●[Performance] The XSound 2.1R helmet speakers offer amazing sound quality, with solid bass and clear highs that rival some of the best full-sized headphones. However, its important to note that the maximum volume levels (max 124dB) of these speakers are the loudest we have ever made. Use with caution!
●[Music Source] Output power and quality of the device you plug the speakers into will affect the volume and overall sound quality. Use a device with a high-quality output and be careful when adjusting the XSound 2.1R with the added extra volume.
●[XSound Kit] Proper speaker placement is crucial for optimal audio quality and volume. The XSound 2.1 comes with 3M velcro stickers to keep your speakers securely in place inside your helmet. Correctly align the speakers to elevate your helmet audio experience. For the best results, position the speakers as close to your ears as possible and use the included foam spacers to achieve the ideal fit.
●[Connect With] The XSound 2.1R helmet speaker uses a 3.5mm audio pin. Compatible with most bluetooth comms, smartphones and mp3 players. Please ensure that your device has a 3.5mm earbud jack/female plug (not compatible with all Sena Motorcycle Headsets). Pending on audio source level, helmet speakers may require volume boost app or a EAR3 helmet amp for some smartphones, Bluetooth comms and other devices.
●[Dimensions] Tuned 40mm drivers. Measures 1.77" (45mm) in diameter and 0.39" (10mm) thin with velcro installed. Varied length Kevlar-reinforced wires stand up to 10lbs of pulling tension. Cable lengths LEFT speaker: 19.29" (49cm) RIGHT speaker: 11.41" (29cm), with 40" (100cm) extension cable.
Description
The IASUS product ethos is to develop innovative, purposeful products without constraints. We use the very best materials and technologies that are available to create extreme products. Even within the IASUS product lines, we continue to seek new ways to improve with new generations to keep up with today’s new technologies.
The XSound 2.1R Helmet Speaker’s stainless steel chassis provides new amazing bass response and full-range output. Velcro attachments ensure the speakers are removable and will never lose their place.
The XSound 2.1R Helmet Speakers are compatible with any headphone or earphone device with a 3.5mm audio plug. Motorcycling, ATV, Snowmobiling, Snowboarding, Skiing, Skydiving, Paragliding and anything you can imagine.
- 3.5mm pin plug. It is compatible with most iPhone, Android, Samsung, Filo, EAR3, and some bluetooth comm systems like Sena Cardo (with 3.5mm headphone jack on the mount).
- Cable lengths (LEFT speaker: 49cm (15.8") RIGHT: 29cm (7.9"), with 100cm (40") extension cable with gold plated connectors.
- Equipped with the kevlar-reinforced wires to withstand 10 lbs of pulling tension in demanding scenarios.
- Designed and tested to be used with the IASUS REKON motorcycle comms, IASUS throat mic headsets and mobile amplifiers, IASUS Stealth Bluetooth headset, smartphones and portable music devices.
|
|
|
|
|
|---|---|---|---|
Audio RangeThe XS2.1R brings your music to life with depth and clarity that standard helmet speakers can’t deliver. And they’re redesigned and engineered with a slim stainless steel chassis for fitment for any helmet. Volume will vary when used with Bluetooth motorcycle headsets. Volume level depends on your headset and if it has sufficient wattage to drive them. Tested performance output 124dB; IASUS does not recommend long exposures at the highest volume as it may permanently damage your ears. |
Chassis + DimensionsThe XSound 2.1R Helmet Speaker’s new stainless steel chassis with 45mm audio drivers inside provides exceptional bass response and full-range output. Dimensions 1.77" (45mm) in diameter, 0.39" (10mm) thin Kevlar reinforced wires for superior durability Left wire length: 19.29” (49cm) Right wire length: 11.41” (29cm) |
SpecificationsMax Power - 60 mW Impedence - 64 Ohm Frequency Range - 50Hz – 20kHz Sensitivity - 125dB Weight - 1.26oz (36g) High Bass - Perfect for your audio |
Compatibility + InstallCan be installed in less than 5 minutes. The standard 3.5mm (1/8″) plug ensures connection with almost any mobile audio device. The helmet speakers come with premium 3M Velcro that offers a perfect fitment to the helmet you use. Simply attach it inside the helmet and position the speakers directly on top of your ear for the best audio experience. For wireless application, the speakers are compatible with the IASUS Rekon helmet comm system, smartphones (may need the 3.5mm dongle), mp3 music players and more... |
Whats Included
- Speakers – Left and right speakers
- Premium 3M Velcro
- Cable – 3’4″ (1m) 3.5mm heavy-duty extension cable
- Foam Covers
TESTING BEFORE MOUNTING THE SPEAKERS IN YOUR HELMET
|
|
|
|
|---|---|---|
1. Test XSound 2.1 sound qualityBefore mounting the speakers in your helmet, it is recommended to test and connect the helmet speakers directly to your smartphone or music player. Use the 3.5mm extension cable and hold the XSound 2.1 speakers to your ears as your music plays. |
2. Find the optimal position on your earPosition the XSound helmet speakers so that it is directly on your ear canal while wearing your helmet. You may need to make multiple adjustments until you reach the optimal positioning. It is also recommended that the speakers touch the surface of your ears to avoid any loss of sound from the speakers. |
3. Make sure there is enough space in your helmet for the speakersCertain brands of helmet and headgear are designed for a tighter fit and may not accommodate our speakers. Please determine whether your helmet can comfortably accommodate the extra 1/2 inch of helmet speaker on each side before your purchase. Modification to the helmet may be required. **XSound 2.1 helmet speakers shown in the image above. Foam spacer can be purchased separately. |
