Feature
●Prevent Scratched Vinyl Wraps: Cut your own self-adhesive felt strips to stick to the edge of your vinyl wrapping squeegees, preventing scratches to your freshly installed vinyl. Also ideal for installing window tint film, and any soft media.
●Massive Savings: Vinyl applicator squeegees require 4” strips of felt to cover the edge. You can cut up to 75 x 4 inch strips from this roll at a fraction of the cost of a premade felt tip, making it an economical alternative to buying felt edges.
●Don’t Run Out Of Felt: Depending on the complexity of the shapes to be wrapped, and the type of vinyl used, you may need several felt edges. With this roll you won’t run out, leaving the job half done, or worse, scratching the vinyl by using a squeegee without a felt edge.
●Long Life: Made from durable materials designed to withstand the rigors of vinyl wrapping. Our adhesive is strong enough to hold, yet can be removed from surfaces, should you decide to.
●Multi-Purpose: Cut your own soft, self-adhesive strips to fit any squeegee for any project.
Description
Cut a strip of felt long enough to cover the edge of your squeegee. For most squeegees, this will be approx. 4 inches.
Peel the backing off the cut piece of felt, to expose the adhesive side.
Stick the felt onto one side of the squeegee, then fold it over to cover the other side. Press it on firmly.
Now your squeegee is ready to smoothly apply vinyl to any surface without scratching or otherwise damaging the expensive vinyl.
