Installation TipsUnless otherwise specified, most carpets come uncut, and buyer will need to cut holes as needed.Please make sure the carpet fits the floor pan before making any cuts or alterations. If you have any questions, it is best to contact us before altering the carpet, as it is not returnable if altered. The first thing to do when preparing to install a carpet is to remove it from the box and let the carpet sit for about 24 hours, preferably in a warm area. This will allow the carpet to retake its molded shape. When test fitting it into the vehicle youll likely notice that there will be additional material on the sides. Thats completely normal, youll need to trim it to the desired width. If a hole is needing to be cut for seats, console, etc, it is always best to start with a small slice as a test fit. Slices can be easily taped back together if they are in the wrong spot, holes cannot. Never use the old carpet as a template for the new one. It is fine to reference it, but it should not be your guide for cutting.Color Note:Online carpet color samples will give the general idea of the color of the carpet. However, all computer monitors are different, which means the color may or may not be a match for your specific vehicle.What is Cutpile Carpet?This carpet is similar to what is found in most domestic vehicles since 1974. In some cases its pile height is not as high as OEM. Our nylon cut pile is constructed from 100% first quality Dupont yarn. It is tufted on a 1/8 gauge machine with 14 ounces of yarn per square yard. It is dyed using the finest dyes available and tested for ozone humidity fading & light fastness.