Feature
●【Value Pack】: This set includes 4pcs disc brake pads & rotor alignment tool, providing you with ample replacements or extras for multiple bikes or future use.
●【High Quality Material】: These bicycle rotor alignment tool are made of high-quality 304 stainless steel material, which is lightweight, durable.
●【Applicable ALL Bike Disc Brake】: Our bicycle disc brake gap regulator are suitable for ALL bike brake disc rotors and brake pads.
●【Easy to Install and Use】: To use the gap regulator tool simply place the alignment tool on your rotor. Above or below the caliper is perfect. Spin your wheel slowly till the alignment tool is positioned between your brake pads. Once in position pull your brake. From here you can diagnose whether the new pads are too thick, the pistons need adjusting, the rotor is slightly bent, etc. After altering check again the rotor and pads positioning with the use of the alignment tool.
●【Instruction】: Loosen the brake caliper bolts, tighten the bolts when applying the brake
Description
How to Use Disc Brake Pad Adjustment Alignment Tool？
Find out the brake caliper.
Remove the brake caliper from the mounting base.
1. Clamp the adjusting Disc Brake Pads & Rotor Alignment Tool on the disc and turn it to the position where the caliper is installed.
2. Put the caliper back, but do not tighten the caliper screw, and repeatedly pinch the brake.
3. Tighten the brake without releasing it. At the same time, use an Allen tool to lock the caliper screw, and then release the brake.
4. Slowly rotate the disc to turn out the adjusting tab.
Rotate the disc for inspection. Basically, you can pass it once. If it doesnt work once, you can pass it twice. If it does not work for many times, it means that the disc or the chuck piston is broken.
