Feature

●PCIE X1 INTERFACE -- This 10-port SATA expansion card is compatible with PCIE X1, X4, X8, X16, not compatible with PCI slots.
●POWERFUL CHIP -- Integrated ASM1166+JMicron JMB5xx chip, the stability and compatibility of this PCIe to SATA card have been improved. This PCIe SATA card does not support hardware RAID.
●CAMPATIBILITY -- Supports Windows 8/10/MAC/NAS/Ubuntu (not recommended for Win 7 use, may be blocked) With the YBBOTT 10-port PCIE SATA card, you can add 10 SATA III 6Gb/s drives for your desktop. (Lenovo and Dell computers block the BIOS interface of any third-party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read. )
●10 PORT SATA CARD -- With the 10-port SATA PCIe card, you can add 10 SATA III 6Gb/s drives for your desktop. (Lenovo and Dell computers block the BIOS interface of any third-party SATA controller, unpredictable compatibility problems may occur or the SATA card cannot be read. )
●SPECIFICATION -- Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0. If higher speed is required, the motherboard must be PCIe 2.0 or higher. Insert a 10-port SATA PCIe card into the x16 slot. The actual speed depends on the PCIe bandwidth of the motherboard. If all ports are used at the same time, the speed will slow down.


Description

System Requirements

Applicable Slots: PCI-Express X1, can be used on PCIe slots X4 / X8 / X16

System: Support for Windows 8/10 (32/64 bit)/MAC 10.14/NAS/Linux

Not recommended for use with Win 7, may be blocked.

-Multiple hard drives require sufficient power to prevent "drop channels" "not working" and so on.

-Using multiple operating systems supports only Windows.

-You must turn off the power before connecting the SATA PCIe card to the motherboard or remove it.

-The PCIe X1 10-port SATA 3.0 PCIe controller card provides a simple connection between a host computer and SATA 3.0 devices (SATA hard drive or SATA device), enabling 10 SATA devices at speeds up to 6 Gbps.

Product Features

Chipset: Asmedia ASM1166+JMB5XX.

Supports 10 SATA 3.0 6 Gbps devices.

Complies with PCI-Express v2.0, v3.0 specification, backward compatible with PCIe1.0. Complies with Serial ATA 3.0 specification, backward compatible with Serial ATA2.0, Serial ATA1.0.

Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.

Supports FIS-based port multiplier and Plug and play command-based switching, supports Hot Plug and Hot Swap.

Package Contents

10 x SATA cables

1 x PCIe X1 to 10 SATA 3.0 controller card

1 x Low profile bracket

1 x SATA splitter adapter cables