Feature(may vary by option.)
●This multi-functional vacuum pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition & Heating Controls, Cruise Control Systems, Brake Systems etc., especially work for changing brake clutch fluid and power steering fluid. Use the hand pump to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
●The included three differently sized black L type rubber connectors and two straight cone rubber connectors, can connect with the brake bleeder valve on any vehicles or motorcycles that use standard brake bleed valves. Use the closest sized one to ensure a tight fit. And bleed from master cylinder to wheel cylinder and caliper. There is a universal cup adapter packed in the case, can use as a vacuum sealer to match with your reusable vacuum food storage bags.
●The hand pump adopts brass cylinder with a -30 to 0inHg gauge, has pressure-maintaining function and a pressure relief valve on the cylinder. The tool also uses rubber trigger cover to protect hand. The 2PCS 20"L and 2PCS 4"L transport hoses are transparent, help to observe if the waste oil is all pumped out. When you see the clear new brake oil is sucked out in the hose without any air bubble, then done.
●In the hand held vacuum pump tester set, there is a 120ml / 4.5oz storage jar, which has liquid storage cover and liquid transfer cover with 2PCS O-rings for sealing. Please note, there is a connection direction request for the liquid transfer cover, connect the side marked "TO PUMP" to hand pump by short 4"L hose, if not, the waste oil may be sucked into the pump and destroy it. Do not invert the jar while using too.
●If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a blocked brake bleeder valve. You need to clean the brake bleeder valve first, and then do not forget to suck out the air if you do not change the waste oil this time. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
[Red]
[Blue]
[Black]
Description
Package List
1x Hand held vacuum pump tester
1x Storage jar
7x Adapters
1x Cup adapter
4x Vacuum hoses (2PCS 4"L, 2PCS 20"L)
2x Plastic covers
1x Instruction
1x Black case
Product Details
|
|
|
|
|
|---|---|---|---|
Abundant AdaptersSeveral types adapters meet various requirements 1.3PCS L type brake bleeder valve adapters 2.Barbed straight hose connector 3.Barbed T type hose connector 4.2PCS straight cone adapters 5.1PC universal cup adapter |
Transparent Hoses4 tubes of different length (2PCS 20"L & 2PCS 4"L) to cover different needs Transport hoses are transparent for direct observation whether the waste oil is all pumped out |
Storage Jar & Two Lids120ML storage jar A storage lid and a liquid transfer lid 2PCS o-rings for good sealing effect |
Blow-molded CaseEverything is compact in a nice and solid black portable case It accommodates all the tools easily but doesnt take up much space in the garage or your trunk Search B08BFXPJFS for red case & B08CRG29YQ for blue case |
Easy to Bleed the Brake Oil
1. Make sure vehicles master cylinder reservoir is full and clean brake bleeder valve before the use.
2. Bleed the system in the following order:
a. Master cylinder (If bleeder equipped)
b. Wheel cylinders and calipers in succession, beginning with the wheel closest to the master cylinder and progressing to the one farthest from it
3. Assemble the brake clutch fluid bleeder tool according to following sequence: Hand pump - 4" hose - transfer cover "To Pump" side - 4" hose to the bottom of the transfer cover & storage jar - 20" hose - proper size adapter - vehicle brake bleeder valve
4. Attach the brake bleeding fitting to the bleed screw and pump the brake bleeder pump 10-15 times to create a vacuum in the storage jar (If the brake bleeder screw is not sealed well, the air will go into the transparent hose, and you will see bubbles. There are three sizes of brake bleeder screw adapters, please choose the most appropriate size adapter. Grease the brake bleeder screw if it cannot be completely sealed when use.)
5. Open the vehicle’s brake bleeding fitting 1/4-1/2 turn and allow about 2 in of fluid to flow into the storage jar
6. Fill the master cylinder reservoir back to normal with fresh fluid and proceed to the vehicle’s next brake and perform the same steps as above
Dos: Upon receipt of the goods, please check the products for any damage or omission for timely communication and satisfactory solution
If the brake bleeder valve is stucked, clean it first and remember to suck out the air if you do not change the waste oil this time
Each of your tools and accessories must be air tight during the work. This is why we provide several different fittings for various brake bleeder valve
Connect the side marked "TO PUMP" to hand pump by short 4"L hose, if not, the waste oil may be sucked into the pump and destroy it
Donts: Do not invert the jar while using & Do not use the vacuum pump to siphon liquid or it will do damage to the internal chamber
|
|
|
|
|
|
|---|---|---|---|---|---|
| YSTOOL Brake and Clutch Fluid Pneumatic Vacuum Bleeder Tool Kit | YSTOOL Brake and Clutch Fluid Hand Pump Vacuum Bleeder Tool Kit | YSTOOL Hand Held Vacuum and Pressure Pump Brake Clutch Fluid Bleeder Tool Kit | YSTOOL Professional Brake and Clutch Fluid Pneumatic Vacuum Bleeder Machine Kit | YSTOOL Brake and Clutch Fluid Pneumatic Vacuum Bleeder Tool Kit | |
|
|
|||||
| Customer Reviews |
459
|
644
|
278
|
73
|
244
|
| Price | $17.99 | $17.99 | $35.99 | — | $18.99 |
| Power | Pneumatic (Need Vacuum Pump, not included) | Manual | Manual | Pneumatic (Need Air Compressor, not included) | Pneumatic (Need Vacuum Pump, not included) |
| Function | Vacuum | Vacuum | Vacuum & Pump | Pump | Vacuum |
| Jar | 1L waste oil bottle, 0.8L new oil bottle | 120ML waste oil jar | 2PCS 120ML waste oil jars | 10L large fluid capacity tank with 5L new oil capacity, 1L waste oil bottle | 340ML waste oil bottle |