Feature(may vary by option.)

●[COMPATIBLE WITH] 2007-2013 Chevy Silverado 1500 2500 3500HD 6.5 & 8 Bed | Not Compatible for GMC Sierra; 2007 Classic; 5.8ft Short Bed models | Not Compatible for Dually models | Mud flaps removal are required prior to installation | Compatible with Aftermarket Bumpers
●[FINISH] 4PC Paintable Fine-Textured 100% UV protected fender flares | Flare Height: 4.75" in front and rear Tire Coverage: 0.75" in front and rear
●[FEATURES] Made of impact-resistant polypropylene with well-developed injection molding technology, NOT cheap ABS in the market, these flares will hug the curves your vehicle and eliminate the mess of using 3M tape.
●[INSTALLATION] Easy to read instruction and mounting hardware kit included; average installation time 1+ hour | no drilling
●[WARRANTY INFO] 60-Month Warranty for US customers against cracking, warping or any other factory defects.

[Black 5.8 ]




[Black 6.5  & 8 ]





Description

OE Style Fender FlaresOE Style Fender Flares

VEHICLE COMPATIBILITY

  • FIT 2007-2013 Chevy Silverado 1500 2500 3500HD 6.5 or 8 bed
  • NOT FIT GMC Sierra; 2007 Classic; 5.8ft Short Bed models

Fine Textured - FactoryFine Textured - Factory
Fine Texture - FactoryFine Texture - Factory

How are these Fender Flares installed?

Full installation shouldnt take more than an hour. First, lay the flares against the body of your vehicle. If they fit correctly, the bottom edge will align with the bottom of your vehicles fender and the front will snuggly fit against the bumper.

Do they come with all the necessary hardware and instructions for installation?

The package includes 4 fender flare pieces and a hardware kit. However, installation tools are not included.

Can I paint or customize these fender flares and is it necessary to remove mud flaps before installation?

Yes, the fender flares are paintable and mud flaps removal is required prior to installation.

Can I go to the automatic “brush-style” car wash with fender flares equipped?

It is strongly recommended to avoid automatic "brush-style" car washes with these fender flares installed. Instead, only touchless carwash is recommended.

What should I do if there are gaps between the flare and the truck body?

First, loosen the screws and push the flares against the truck body to make it snug. Then, tighten the screws from the top of the wheel well. You may also let your vehicle sit under the sun for 2-3 hours. In winter, use a heat gun or hair dryer.

PaintablePaintable
Fender FlaresFender Flares

Product information