Feature

●2.4G wireless transmission, 32 channels, support up to 1/8000s HSS function
●Featuring multi-channel triggering, stable signal transmission, and sensitive reaction
●Provides up to 100 meters further transmission distance and creative triggering methods
●Use with X1T-C transmitter (sold separately) to trigger camera flash which support Canon E-TTL II autoflash
●Wireless remote control and grouping system; support 5 groups and 32 channels to triggering flash, with Big and Clear LCD Panel for easy operation

Description

Kindly Note:

The X1T-C, Xpro-C, X2T-C mentioned below are sold separately

Features:

- The X1R-C can receive transmission signal from X1T-C, Xpro-C, X2T-C transmitter (Sold Separately)

- It generally used with a transmitter to trigger camera, camera flash, studio flash

- Support Canon E-TTL II autoflash

- Support 2.4G wireless transmission signal

- Support Max. 1/8000s HSS, according to your camera shutter speed rate

- Controllable slave group: Max. 6 groups (M/A/B/C/D/E)

- Transmission range(approx.):100 meters

- Channel: 32 channels

- When used as a camera flash sync receiver, it fully compatible with camera flash HSS, FEC, FEB, Manual Focus, Multi Flash, Zoom triggered by X1T-C transmitter

Kindly Note:

1. You should set camera and camera flash to TTL mode, and the X1T-C trigger and X1R-C receiver all of them should be in the same group, channel and wireless ID

2. Make sure your camera and camera flash all have the full function, such as, if you need a 1/8000s HSS, make sure your camera and camera flash support 1/8000s shutter speed

3. When use the X1T-C transmitter trigger the X1R-C in super close distance, please switch the X1T-C to super close distance trigger mode

Low Battery Indicator & TEST Button

Features TEST button for contact test ensure proper installation
LOW battery indicator for just a glance ensure good working condition

Large LCD Panel

Large clear LCD panel for easy operation
Feature group button and channel button for easy settings

USB Firmware Upgrade

USB Firmware upgrade port for latest version for compatible with X1T-N, Xpro-N, X2T-N transmitter(Sold Separately)

Power Supply

Power Supply by 2 x 1.5V AA alkaline battery
1/4" thread hole for convenient install

Using Method


Trigger Camera Flash The X1R-C receiver can combine use with X1T-C trigger to trigger camera flash which support E-TTL II autoflash to achieve wireless remote control	Trigger Studio Flash Using a sync cable connect studio flash and X1R-C receiver, it can be triggered by X1T-C transmitter on camera	As a Camera Shutter Using a sync cable connect camera and X1R-C receiver, it can be triggered by X1T-C transmitter as a camera shutter release