●Adjustable Telescoping Laser Level Pole - KEZERS FLP370B Laser Level Mounting Pole,provided you the possibility to place your tools at any height from the floor to the ceiling.4 metal rods and a telescopic tail rod are included,when all parts are assembled,it will become a 12.14ft/3.7m pole. ●Multi-Function Mounting Bracket - With 1/4”-20 male thread and 5/8”-11 thread adapter,the mounting bracket compatible with most line lasers and rotary lasers.You can placed the bracket at any height of the pole as your needs. ●High stability & Spring-load Base - The unique Spring-load base design makes you very easy and quick to tension setup.With 5cm powerful spring provides a greater adjustable range and a more stable fixed requirement.You’ll never worry about the laser shifting or moving out of alignment,cause of the laser pole’s spring-loaded end provides a tight compression fit on the ceiling,cross-beam or floor.The surface of the foot and head plate are non-slip. ●Stable Tripod Base with Built-in Bubble - Made of aluminum material,and plastic joints and ribbed,rubber feet,provided a more stable construction.Two-section legs height adjustment buckle to meet your different needs.And you can twist the screw clamp on the side of the head to stable the pole to make it don’t shift,also,the small bubble level embedded in the head makes sure your measurements will be more accurate. ●Easy to Assemble and Transport - Easily rotated the rod sections to assembled the pole,with a soft carry bag,you can package all the sections of the rod in the bag,and the length less than 80cm/31.5 inch,its very convenient for you to storage and transport. ●Customer Service:We treasure every customers good shopping experience,and will and always do our best to solve all our customers issues about our laser level pole,every laser level pole will support 1 years warranty,and 7 X 24hours customer service.
[KM360-Laser Level Bracket]
[Laser Level Tripod with Pole]
Description
KEZERS FLP370B Telescoping Laser level pole with tripod
Rod Sections: 4 telescopic rod + 1 Tail rod
Rod Wall Thickness: 10mm
Connection interface between rods: 5/8"
Height of rod section: 60cm/23.62" and 30cm/11.81"
Height of arbitrary telescopic rod: 0-53cm /0-20.87"
Max height after fully assembled: 3.7m / 12.18ft.
Tripod height: 48-84cm / 18.90-33.07"
Bracket Mount Size:1/4"-20 & 5/8"-11
The length of the male thread to the side of the bracket: 11.5-6.5cm / 4.53-2.56"
Align and plumb your walls/ Leveling floors/ceiling installation/ Align fences, posts and decks/laser level for picture hanging/Align shelves, cabinets and trim/ check and level posts and beams on decks/ fences and porches Masonry alignment
Detect the Green & Red laser beams up to 60 ft
Install your laser level
Mounting your laser level at any height of your room from floor to ceiling
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.