Build Your Own Cultivator with Woodward Crossings # 76A383 7" Sweep. Bolt Sweep on a Standard S-Tine. Sweeps are 1/4” thick, made to fit the Danish “S” tine and other field preparation equipment of this type. Also Available to Create Your Own Cultivator: Clamp for Danish S-Tine to Fit on a 2”x2” Toolbar on a 3 Pt. Hitch Below (Sold Separately at Woodward Crossings) #76A386 Danish S-Tine Clamp (Sold Separately). Also available at Woodward Crossings are sweeps, tines and bolts to build your cultivator. Sweep is to be attached to the bottom of the S-Tine pictured above (Sold Separately) # 76A380 Sweep 1 (Not Included) # 76A382 Sweep 4 (Not Included) # 76A383 Sweep 7 (Not Included) 7A9080 Bolts to Attach Sweeps to S-tines (Sold Separately) # HT02-04-L4 2 x 2 Toolbar for a 3 Point Hitch (Sold Separately) Suggested Setup Tools Needed: Snug up Elliptical Bolts on S-Tines with 9/16” wrench You will need 3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar 11/16” Wrench to snug up the bolts on the S-Tine Clamps