Feature
●[THE PROTECTION YOU NEED] Firefighting is a dirty job. The FB99 helps protect firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear by containing used gear in an air tight bag until it can be washed at the station
●[NOT YOUR GRANDPAS GEAR BAG] Water & air tight TPU fabric is impenetrable, unlike nylon and polyester, which absorbs liquids and particulates
●[HIGHLY ADVANCED CONSTRUCTION] Heat Welded Seams means there are no load bearing stitches in the construction of the bag. All seams are attached by heat, which literally welds the two pieces together, creating an air-tight seal
●[WATERPROOF ZIPPERS] Regular coil zippers have exposed teeth which allow air and moisture to escape. Our zippers have a rubber seal on the outside that keeps contaminates contained on the inside of the turnout bag
●[BE "SEEN" ON SCENE] Reflective yellow/silver webbing zipper pulls helps identify your bag and is highly reflective even in minimal light
Description
Carcinogen Resistant Dry Turnout Bag LXFB99
Protects firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear
The LXFB99 is the first gear bag of its kind designed to protect firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear until the gear can be cleaned and sanitized at the station. The bag is made with water and air tight TPU (thermoplastic polyurethane) fabric and self-healing, water resistant zippers. All seams on the main compartments of the bag are heat welded, so there are no stitches that penetrate the bag to allow air or particulates to escape (think: moisture barrier on turnout gear). Since the fabric is waterproof, the inside and outside can be cleaned and washed out with a hose to remove any remaining contaminates after the dirty turnout gear is removed and washed.
Water & air tight TPU fabric
Heat Welded Seams (no stitching)
The bag is designed with a main compartment to hold a full set of turnout gear including coats, pants and boots. A left-side compartment to hold a full-sized, traditional fire helmet with eagle and shield. Also a right-side compartment to hold an SCBA mask, jumpsuit, wildland gear or even a change of clothes. Finally, it has a small pocket on the front to hold personal effects such as a set of keys or a wallet.
The straps, handle and shoulder carry strap are stitched with silver reflective tape for easy visibility and safety on-scene. The front of the bag includes a screen printed silver “FIRE DEPT” maltese cross logo.
Water resistant zippers
Reflective webbing
Lightning X Products has been designing and manufacturing firefighter gear bags for over 25 years. We value customer feedback, and thats how this gear bag came to be created!
The LXFB99 is the first gear bag of its kind designed to protect firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear until the gear can be cleaned and sanitized at the station. The bag is made with water and air tight TPU (thermoplastic polyurethane) fabric and self-healing, water resistant zippers. All seams on the main compartments of the bag are heat welded, so there are no stitches that penetrate the bag to allow air or particulates to escape (think: moisture barrier on turnout gear). Since the fabric is waterproof, the inside and outside can be cleaned and washed out with a hose to remove any remaining contaminates after the dirty turnout gear is removed and washed.
The bag is designed with a main compartment to hold a full set of turnout gear including coats, pants and boots. A left-side compartment to hold a full-sized, traditional fire helmet with eagle and shield. Also a right-side compartment to hold an SCBA mask, jumpsuit, wildland gear or even a change of clothes. Finally, it has a small pocket on the front to hold personal effects such as a set of keys or a wallet.
The straps, handle and shoulder carry strap are stitched with silver reflective tape for easy visibility and safety on-scene. The front of the bag includes a screen printed silver “FIRE DEPT” maltese cross logo.
The TPU fabric is air and water tight, but the zippers are water resistant, so this prevents the assembled bag itself from being completely waterproof. It is designed to keep the hazardous contents of the bag in the bag, not to keep water out, and therefore should be stored like any other turnout gear bag, and not submerged or stored in the elements. FEATURES INCLUDE:
- Protects firefighters from prolonged exposure to carcinogens and off-gassing from contaminated turnout gear
- Water & air tight TPU fabric
- Heat Welded Seams (no stitching)
- Water resistant zippers
- Reflective webbing
- DIMENSIONS: 30″(L) x 14″(W) x 15″(H)
Expertly Designed Features for Unmatched Quality
|
|
|
|
|
|---|---|---|---|
Reflective Zipper PullsFeatures ballistic nylon webbing zipper pullers, covered with high-vis fluorescent yellow webbing, with screen printed silver reflective tape across both sides, for 360 degrees of visibility on scene |
All seams in the construction of the FB99 gear bag are pre-molded and then heat welded together, so that there are no holes directly into the bag from sewing or stitching - giving the bag an air tight and water tight design |
Heavy-Duty ballistic nylon webbing shoulder strap with silver reflective tape woven directly into the strap - anchored by a forged steel US Hook - powder coated in a stealth black top coat |
Self-healing zippers with a water resistant covering keeps contaminates inside the bag as well as air, water and debris out of the bag and off of your turnout gear |
