Feature(may vary by option.)
●Newly Upgraded HIH Hologram Building Plate: Beam Pattern on one side and Phantom Pattern on the other side. Under the light from different angles, the bottom of the prints will show rich and vivid colors, bringing fantastic visual effects, adding more interesting inspirations to your creations and immersing you in the fun of 3D printing item.
●Easy Print Bed Adhesion: The model can be firmly attached to the surface of the print bed. Easily print even for a newbie. The H1H spring steel flexible build plate (253.8 x 241 mm) has a good adhesive,even better than smooth PEI PET or PEO. It even can stick well without heating the platform, no glue needed. Please let the build plate cool down(Below 30 degrees Celsius) before remove the model to protecting the coating.
●Usage: We provide lint-free cotton paper towels and gloves. When using the plate, please wear gloves first and then peel off the protective mold on both sides, then put it on the printer, make sure it is installed well and then wipe off the gray layer left on the plate (you need to wear gloves and wipe with a paper towel to make sure that there is no impurity on the plate before each print).
●Easy Maintenance: The beam or phantom pattern of the printed model may fade or disappear if fingerprints or other oily objects are left on the hands of the steel plate, but dont worry. First keep the steel plate away from the nozzle, preheat the hotbed to 40 degrees Celsius, then sprayalcohol and use our lint-free cotton paper towels and the problem is easily solved. This method also works for Ender 3 Neptune 4 Bmabulabs X1 X1C X1E P1P P1S A1 and other various smooth steel plates on the market.
●Package Includes: 1Pcs Hologram steel plate and 2 gloves.
[PEY]
[PEO]
[H1H]
Description
The H1H steel plate surface is resistant to temperatures up to 200°C. After extensive testing, we recommend the H1H for printing on PLA / PETG / ABS, if you want to print on other filaments, please adjust the parameters.
PLA: 50-60 degrees Celsius / 122-140 degrees Fahrenheit in the heat bed and 220-230 degrees Celsius / 428-446 degrees Fahrenheit in the nozzle.
PETG: Heat bed temperature 80-90 degrees Celsius / 176-194 degrees Celsius, nozzle temperature 240-250 degrees Celsius / 464-482 degrees Celsius.
ABS: Hot bed temperature 90-100 degrees Celsius/194-212 degrees Celsius, nozzle temperature 250-270 degrees Celsius/482-518 degrees Celsius.