![Autel TPMS Sensor Rubber MX-Sensor 315MHz + 433MHz 2in1 Tire Replacement 1-Sensor for All Cars](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
CLICK-IN & PRESS-OUT
The exclusive Autel MX-Sensor is patented with press-release valve design, allowing rubber and metal sensor valves to freely interchange by hand, without requiring a tool for sensor head fitting.
1. Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead.
2. Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead.
3. Dismounting the sensor: Remove the cap, screw nut, and washer from the valve stem, and then remove the sensor assembly from the rim.
4. Mounting sensor and valve: Firmly connect the valve stem and the sensor body. Remove the cap, screw nut, and washer from the valve stem one by one. Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim, assemble the two parts back on the stem in the order of washer, screw nut.Tighten the screw nut with 4.0N·m with the help of the fixed rod, then assemble the cap back on the stem.
5. Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180. Mount the tire over the rim.