![1](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Installation takes just three steps:
Step 1:
Tear off the double-sided adhesive sticker on the back of the magnetic strip
Step 2:
Stick the magnetic strip with the double-sided adhesive sticker removed to any place
Step 3:
Align the opposite side of the motion sensor LED lights with the magnet, Easy installation completed
Warm TIPS:
1. Do not stick the tape in a hot, humid, dusty or uneven place.
2. If rv lights cannot work, please ensure the batteries are installed properly and it is dark enough in the environment.
3. Please fully charge the under rv step lights before using it for the first time, otherwise the light may not work well because of the circuit protection. If the light is idle for a long time, please charge it at least once every three months for the sake of a longer battery service life.
4. In the Auto mode,the rv step lights will detect human motion within 10 feet in dark,which means that one rv step lights may not light on if it is placed near another rv step lights in the AUTO Mode as light from the other rv step lights will affect its sensing state.