[Long]
[Short]
Specification:
T Hand Ratchet Tap Wrench
Wrench Material: Alloy steel.
Tap Material: HSS (High Speed Steels).
Screw Type: Coarse thread.
Size of metric thread taps: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25.
Wrench body length: 85.5mm / 3.37inch.
T-Handle length: 99.9mm / 3.93inch.
Feature:
➤ All-steel design with chromium-plated finish for the highest durability Beautifully precise ratcheting action for high quality work.
➤ Easily switched from left to right handed operation, can also locked for non-ratcheting use.
➤ T-handle is adjustable, T-shaped or 7 word shaped design, can one-hand operation, easy to use. The Handle made of high quality bearing steel, the chuck made of alloy steel.
➤ Allows you to remove bronken screws or bolts.
➤ Suitable for bicycle repair, assemble furniture, mechanical maintenance, ect.
Tap Wrench operate main point:
1. The good pit hole must chamfering chamfer first
2. To use drill clamp supporting tap
3. Tap to vertical alignment operation
4. Cut into rotation level 2-3 times
5. confirm vertical after Cut
6. Tapping 3/4 turn after a quarter back feeling
7. level reversal pull out after working
8. Remember that cutting metal need to use with the grease
Tips:
➤ First install the power lever, which can be reversed in right-handed tapping or left-handed tapping.
➤ After inserting the tap, set the toggle switch to the middle position to lock, then tighten the chuck clockwise.
➤ Tighten the collet and use it, replacing different types of taps according to tolerance of the wrench.
➤ When replacing the tap, rotate counterclockwise to release the chuck and adjust it to fit in the tread tap.
➤ Be careful not to over-relax and loosen, which may cause the internal spring of the product to fall off.
Package Included:
5 x Screw Taps
1 x T-Handle Ratchet