Feature(may vary by option.)
●【Buyer guide】：3/4/6inch 3 jaws puller Max. Tensile Force (t) 1/1.5/2.7, Max. Jaw Spread (inch) 3/4/6, total screw rod length 95mm/130mm/185mm.The centre stand is designed with four corners and can be used as either a 3 jaw puller or a 2 jaw puller.
●【Essential automotive tools for mechanics】:If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
●【Super rigid】: Our 3 jaw puller is forged from integral heat-treated steel with an electroplated finish to ensure it is resistant to warping and rusting. The extra strong grip and reversible jaws support SEAL pulling work on most vehicles with maximum flexibility.
●【Reversible jaws】: The jaws of the 3-jaw wheel bearing removal tool can be rotated 360 degrees and the width of the jaws can be extended. The long operating handle helps you to reduce the difficulty of gripping gears and other components in tight spaces and to position them precisely in the centre of the various pulling hooks.
●【Note】: Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application.If there is a quality problem, we are ready to send you If there is a quality problem, we are ready to send you a new one for free or a full refund.
[3 inch]
Description
The heaviest, most flexible bearing puller, gear puller, pulley puller,Performance Puller Tool--3/4/6 Inch 3 Jaw Gear Puller
We specialize in providing you with the most affordable and great tools for diy car repairs!
Specifications.
- 3inch 3 Jaw Gear Puller - Max. Tensile Force (t): 1 ; Max. Jaw Spread(inch) 3
- 4inch 3 Jaw Gear Puller - Max. Tensile Force (t): 1.5 ; Max. Jaw Spread(inch) 4
- 6inch 3 Jaw Gear Puller - Max. Tensile Force (t): 2.7 ; Max. Jaw Spread(inch) 6
- Colour: Silver + Black
- Matreial:CR-V Steel
- You will receive: Screw Stem x1, Pull Tab x6,Bolt x6,Nut x6,Puller Ring x1,Claw Feet 3
- Note: 6 plain nuts are required for assembly of each model.
- In addition, we present 6 anti-falling nuts, which you can choose to
- In addition, we present 6 anti-falling nuts, which you can choose to use according to the actual operation.
- Function: Ideal for removing gears, sprockets, bearings, pulleys and much more.
- When in use, the screw center is positioned at the shaft end center hole
- to adjust the position of the pulling claw so that the pulling claw is hooked
- to the outer ring of the bearing, and the rotating handle makes the pulling
- The rotating handle makes the pulling claw drive the bearing to move outward along the axis to remove.
Perfect after-sales service
We dare to make a promise to our noble customers. If there is any quality problem, we are willing to resend a new one free of charge or give you a full refund. We produce very good quality, no hassle for life with a 24 hour response service that is friendly to offer. If you have any complaints or needs, please email us and thank you for your support!