Feature(may vary by option.)

●【Easy to Use】: NASUBI silicone mold making kit contains two bottles of A and B. The mixing ratio is 1:1 by weight. This liquid silicone is designed with light blue that is easy to tell if parts A and B are mixed evenly enough. If liquid silicone spills, simply clean it with alcohol.
●【Fast Curing】: At room temperature (78.8°F/26°C), working time is 30 minutes, demold time is 3-5 hours. The shrinkage rate during heating is negligible. The specific time depends on the thickness and size of the mold. If you are an experienced operator, you can heat appropriately to reduce the curing time. The specific time depends on the thickness and size of the mold.
●【No Bubbles and Low Viscosity】The bubbles of this silicone rubber will disappear automatically after two hours of pouring, using this mold making silicone rubber you will get a smooth surface, flexible and soft silicone mold.
●【Safe Mold Making】: NASUBI silicone mold making kit is non-toxic and odorless, food-grade safe silicone, highly flexible and widely used in making various handicrafts. Such as candle molds, handmade soap molds, handicrafts, candy molds, chocolate molds, special-shaped plaster molds, etc.
●【Quality Assurance】The silicone mold making kit has an extra long shelf life of up to 1 year. Simply close the lid and store easily for next time. To avoid the waste, please read the manual carefully and then test in a small amount before working. If you have any questions, please do not hesitate to contact us at any time.

[35.2oz]




[70.4oz]





Description

1000g1000g
500500
Current Time 0:00
Duration 0:43
Loaded: 0%
Stream Type LIVE
Remaining Time 0:43
 
1x
500500
500500

1. How to deal with the problem of silicone mold sticking?

1) Apply a little detergent or Vaseline on the mold before pouring

2) Soak in boiling water and dish soap for a day, then use an air gun or place it in the oven to dry or blow dry.

2.Is the 1: 1 mixing ratio a volumeratio or a weight ratio?

Weight

3.Why does the mold not fully cure?

1)Mixing ratio is not inaccurate.

2)Contact with other concentrated silica gel , heavy metals organic substances which can inhibit the curing process

3) Use UV resin to fix your items.

4)Temperature and curing time is not proper.

4.Which crafts are suitable for 15A hardness?

15A is softer, very easy to demold, suitable for making molds for various crafts, especially those with higher hardness, such as pen holders, storage boxes, ashtrays, etc.