Feature(may vary by option.)

●1)CM Wires technology.
●2)Resistance to cyclic fatigue increased 400% compare to traditional NI-TI
●3)4% Design for curved or complicated canal anatomy
●4)Can be pre-bent and twisted will recover when heated over 60 Degree.
●Rotation Speed:450 RPM Torque:1.8 N/CM2

[25mm]

[31mm]

Description

Using Sequence:

1)Use #8,#10 SS file to negotiate the canal.

2)Use #12,#15,#19 M-Pat to set up a smooth path.

3)Use 30,8% orifice to pre-enlarge the upper canal.

4)Use 20,4%(Yellow),25,4%(Red),30,4%(blue) to prepare to working length.

5)Make sure rinse the canal by nacio,use the #15 to break the debris and then lubricate the canal with EDTA every time changing the files.

6)Use larger size files to finish the preparation depands on the anatomy.

Packing List:

5 files per pack