Feature(may vary by option.)
●❤️Easy to cutter tiles/glass: The tile cutter is very light(only:1.5bl), and the tungsten carbide scoring wheel is sharp. Just press the hand holding the orange handle down to slide, and you can easily draw lines on the tiles
●❤️Cutting size: Maximum cutting length: can be greater than 48 inches (1200mm), it is recommended not to exceed 120 inches (300mm); maximum direct cutting width: 48 inches (1200mm) can be cut through clever methods; cutting thickness: 0.24 - 0.6 (6mm - 15mm); minimum cutting width: 1.97 (50mm)
●❤️Reasonable structure: The breaking pliers are die-cast from aviation aluminum. The main body of the manual tile cutter is made of alloy material, which is very strong and durable. The laser scale is used on the ruler surface, with two units of inch and cm, which fully conforms to your usage habits
●❤️Rich Accessories: Including 1Pc professional ceramic tile cutter, 1Pc upgrade 4.0 Running Plier, 3Pcs Cutter Heads, 2Pcs 22mm tile cutter replacement wheels (Cutter Heads and replacement wheels can be used according to your preference, Can cut tiles/glass normally), easy to install and easy to operate
●❤️Note: When using, put your left hand on the left side of the porcelain tile cutter(if you are right handed), and the 20 nylon wheels under the control are closely attached to the side of the tile. Put your right hand on the orange handle and you need to press down and down gently, and use it after seeing obvious scratches Use pliers to open it, and if the scratch is not obvious enough, you can repeat the operation with manual tile cutter again. Try to avoid frontal bumps on tile cutter wheel
[Can Cut 48 ]
[Can Cut 72 ]
Description
The tile cutter is smaller, but it can still cut 48 large-format tiles; the manual tile cutter is lighter, making it easier for you to use; the breaking pliers are updated, very strong, and a wider range of use (cutting thickness: 0.24 - 0.6 (6mm - 15mm)).It is an essential tool for DIY ceramic tile and wall tile installation projects, make your work easier.
Cutter 48inch (120CM) large format tiles, operation steps :
|
|
|
|
|
|---|---|---|---|
|
The installation direction must be correct. If the tile cutter and the tile cannot fit tightly, please check whether the installation direction of the nylon knife wheel is wrong, and the outside is high and the inside is low. |
Use the correct orientation of the running pliers, TOP up, easy to operate the black handle. |
It is necessary to keep a little distance between the breaking pliers and the tiles, otherwise there will be cracks when they touch the tiles. |
After cutting, most of them are very neat and can be used directly. Due to the strength or the use of pliers, there will be a small part of unevenness, which requires some simple processing with tools. |
Manual large tile cutter 48 inch
If you need a tile that is wider than 24 inches (60 cm), you can split the remaining tiles to achieve the desired width. This will help you get the tile size you want without having to purchase larger, more expensive tile cutter.
Manual large tile cutter more than 48 inch
A flat ceramic tile (or any other suitable object) is all that is needed to serve as an aid for fixing the nylon roller system to one side, while positioning the cutting wheel to make the score and cut lines. It is important that the aid remains relatively stable in relation to the tile being cut, and does not move during the scoring process.
TIPS: When cutting ceramic tiles, its recommended to place them lower to apply more force and achieve deeper scored lines. This will result in better cutting performance and a more precise cut.