Feature

●Manufacturer: Trac; Manufacturer Number: T10080
●Material: Plastic; Overall Dimensions: 8 1/4" L x 5 1/4" W x 4 5/8" D
●Electrical: 12VDC / 2.5 Amp / 5 Amp fuse; CFM: 130 CFM (3690 LPM)
●Provides ventilation for bilges engine compartments, galleys and heads. Computer optimized blade profile and housing design produce high air flow, low amp draw and quiet operation.
●Sold as seen in pictures; Note every computer shows colors differently; All measurements are approximate; Hardware and instruction/installation manual not included.


Description

Boat part number 1045327 is a new ventilation in-line blower from Trac, part number T10080 .

This grey plastic in-line ventilation blower measures approximately 8 1/4" L x 5 1/4" W x 4 5/8" D overall, and has a 3" diameter intake.

Provides ventilation for bilges engine compartments, galleys and heads. Computer optimized blade profile and housing design produce high air flow, low amp draw and quiet operation. Efficient, high output operation features front and rear shaft seals and corrosion resistant ABS housing for long life. Easily installed on any flat surface.

Specifications:

• Part Manufacturer: Trac
• Part Number: T10080
• Intake: 3" Dia.
• CFM: 130 CFM (3690 LPM)
• Electrical: 12VDC / 2.5 Amp / 5 Amp fuse
• Overall Dimensions: 8 1/4" L x 5 1/4" W x 4 5/8" D
• Mounts: (2) 3/16" Dia. holes with 4 3/8" apart center on center
• Connection: (2) Raw Wires

Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.

Instruction / installation manual included. Hardware not included.