EFC 3044196 is an engine speed controller designed by all electronic devices for CUMMINS actuator, the speed controller has fast and precise response to transient load changes. It has a wide speed control range. For these controllers, separate circuits allow adjustments of proportional, integral and derivative values. These parameters work together to provide a control that results in fast and stable engine response to load changes while maintaining precise speed regulation of diesel.

3044196; 3062322; 3037359; 3098693; 4914090; 4914091; 3032733; 3044195.

SPECIFICATIONS & PERFORMANCE for speed control unit 3044196:

Operating Voltage: 12 or 24 volts ±20% Steady State Speed Band: ±0.25% Ambient Operating Temperature: -40℃ to +85℃ Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃ Mechanical Vibration: Withstands the following vibration without failure or degraded , performance: 0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip Enclosure: Die cast aluminum Magnetic Pickup Frequency Range: 2500 - 5000 Hz Output Signal: PWM current to 5A at max. Actuator Compatibility: EFC3408324, DYNA2000, DYNA2500

SPECIFICATION:

RPM Stability:<±0.25%

Speed Range:1KHz ~ 6.5KHz

Thermal Stability:Max ±0.7%

IDLE Regulation:260 ±20Hz

DROOP Regulation:

Minimum 15Hz ±6Hz/ 1 Amp

Maximum: 400Hz ±75Hz/ 1 Amp

External Speed Regulation:±200Hz (with 1 KΩ connected)

AUX Input Sensitivity:148Hz / 1V., ±10Hz

Impedance:1MΩ

Working Temp Range:-40 ~ 85 °C

ENVIRONMENT:

Working Humidity Range:Maximum 95%

Stocking Temp:-55 ~ 92 °C

Shocking:20-100HZ 500mm/Sec.

INPUT POWER PROVIDE:

Voltage:24V

Grounding Pole:Negative pole

Power Provide:40mA

Actuator Continuous Current:Minimum 1A, Maximum 4.5A

MPU:

Signal:2 ~ 120V RMS