Feature(may vary by option.)

●PERFECTLY DESIGN UPGRADE ONLY For 2020-2021 Tacoma TRD Off Road and Sport models or other models with Sport OEM grille.
●PLUG & PLAY Easy installation. No drilling required. The four bezel are different, and the two installed on both sides of the grille have no obvious edges. The two installed in the middle can be distinguished according to the letters on the back of bezel.
●PACKAGE INCLUDED Installation Instructions + 4 LED Light Set + Wire Harness +2 Fuse adapter.
●SAFETY DRIVING Upgraded waterproof of LED grill lights, your vehicle is easier to be seen in rainy/snowy or foggy weather. The lights make other drivers pay attention to your truck.
●CUSTOMER SERVICE If the received accessories are incomplete or any issue with the product, please contact us to solve them.
●Part number: T21
●Fit type: Vehicle Specific

[Amber Shell with Amber Light Raptor Style]




[Black Shell with White Light Raptor Style]




[Black Shell with Amber Light Raptor Style]





Description

Tacoma Raptor LightsTacoma Raptor Lights

Take the look of your Tacoma to the next level with the Tacoma Lifestyle Raptor Lights.

A complete kit with everything needed for a fast and easy install.

tacoma grille lightstacoma grille lights

Tacoma Raptor Lights

COMPATIBILITY

  • 2020-2021 with aftermarket grille or OEM TRD Off Road and TRD Sport.
  • This will NOT work with 2020-2021 OEM SR/SR5/Limited/TRD Pro Grilles.

Features

  • Waterproof, car wash safe
  • Lights easily snap into the grille
  • No modification needed
Installation stepInstallation step

Installation Step

  1. The four bezel are different, and the two installed on both sides of the grille have no obvious edges. The two installed in the middle can be distinguished according to the letters on the back of bezel.
  2. Put the bezel in the grille at an angle, then press it down and it will snap in very tightly and easily. Do the same thing and click on all four.
  3. Connect four LED lights to the equipped wiring harness in turn. Remove the insulator from the red wire of the harness and connect it with the fuse. Clamp the joint with pliers. And wrapped with tape to prevent falling off.
  4. Open the fuse box and find the corresponding place to insert the fuse. (pay attention to the amperage of fuse)

Product information