Description:
HUD displays driving datas on the front windshield such as speed, rpm, fuel consumption, water temperature, voltage; avoiding drivers become dangerous because of watching the instrument while driving. Drivers can read the driving information instantly, and can always keep the best state on the way with HUD.
Main display information:
1.Brightness sensor
2.Water temperature
3.Water temperature scale
4.Engine RPM scale
5.Over speed alarm
6.Gear display
7.Multi-function value
8. for engine RPM,inlet pressure,water temperature,clock,voltage,ignition angle,acceleration time for 100 Kilometers
9.Throttle position and fuel consumption
10.Multi-function value
11.Buzzer mark,engine fault,fatigue alarm,voltage alarm,data transfer
12.Speed unit
13.Calls and SMS alerts(this function is not opened now)
HUD installation:
1. Know your vehicle brand,HUD work for cars with OBDII agreement or EU OBD agreement. Open the engine hood and find the sticker below it (see the below picture 1), if it has words like OBDII CERTIFIED, then it can be installed.
2. Find out the 16 pin diagnostic link (see the below picture 2) of the vehicle and connect it well with OBDII connecting line.
Specification:
Environment temperature: -40c- + 120c atmospheric pressure 86-106KPa
Relative Humidity: 10% -95% environmental noise
= 60dB (A)
Alarm sound level: "= 30dB (A)
Working voltage: 11V ~ 16Vdc (12Vdc / 350mA)
HUD Size: Approx. 150 x 85 x 14(mm)/5.9*3.3*0.6in
HUD Weight: 280g
Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Please note that the new type and old