Feature(may vary by option.)
●Multifunctional: Thanks to its 2-in-1 design, this timer outlet with Interval timing switch function and Countdown timing switch function; Interval timing switch function: Every once in a while, powered on for a period of time, permanent cycle. Countdown timing switch function: Countdown power on for a period of time, then power off and end the timing
●Easy to Operate: This digital timer outlet allows extremely convenient and flexible time setting for hour, minute and second directly, super easy to understand and apply, fully meet your needs. And the Min setting time is as precise as 1 second.
●This outlet timer uses the cursor operating system, "L/R" button to move the cursor position, "+/-" button to control number changes, the operation is very simple.
●This timing outlet uses a 30A high-power relay, can withstand high-power electrical appliances and without current overload.
●Widely Use: Our timer outlet can be used to automate most small home appliances. Use on your fans, lamps, hydroponics, coffee machines, grow light, reptile light,fish tank,aquarium, water pump, aquaculture, feeding machine and more.
●This timing socket uses the mature circuit design, stable and reliable operation, low failure rate
●The internal rechargeable battery does not need to be replaced. If the screen does not display due to long periods of non-use, plug the timer into the power supply and charge for 1 hour, and then press the "RES" button to restore the display.
[D04M]
Description
The indicator light corresponds to the current state of the screen, if the timer jack has electrical output, the current status of the screen is displayed as "ON" and the indicator light is on. If there is no electrical output in the jack, the current status of the screen is displayed as "OFF" and the indicator light is off.
Nominal Voltage: AC85V-265V
Maximum Putout: 20A
Battery: Built-in Rechargeable Batteries, no need to replace
Steps for setting interval timing switch:For example, every hour interval, power on for 5 minutes
|
|
|
|
|
|---|---|---|---|
|
Press “SET” button, then cursor appears, and the bottom right corner of the screen will display "Interval" |
Press “Left/Right” button to move the cursor |
Press “+/-” button to change the value |
Press the "OK" button to complete the interval timing setting |
Steps for setting countdown switch:For example, let the electrical appliance countdown power on for 5 minutes, then power off to end the timing
|
|
|
|
|
|---|---|---|---|
|
Press “COUNTDOWN” button, then cursor appears, and the bottom right corner of the screen will display " Countdown " |
Press “Left/Right” button to move the cursor |
Press “+/-” button to change the value |
Press the "OK" button to complete the countdown timing setting |
