Feature

●Can be used in areas like car headlamps, fog lights, brake lights, door handles, emblems, scratch glass surfaces, interior console panels or small areas
●The universal multi-chuck locking mechanism makes it easier to lock the output shaft for easy replacement of accessories
●Specifically designed for polishing small areas, gently remove grease, grime, and environmental fallout from recessed areas of your vehicles
●A variety of mini-custom accessories that allow you to work a variety of different polishing surfaces
●It comes with a 5/8” connector, works with rotary polishing machines, easy to operate
●The Rotary Polisher in the image is a reference only; the Rotary Polisher is NOT included
●Dimension and Weight: 60.5 (L) end-to-end length, 1.5 pounds
●Reasons to choose MaxShine: MaxShine provides the best quality products and we care; customer service is our number one priority. Nothing is more important than you.

[Adaptor]

[Dia: 15mm Red Finishing Pad]

[Wrench]

[MN01 mini polisher]

[Orange Polishing Pad]

[Dia: 25mm Backing Pad]

[Long Wool Pad]

[Dia: 15mm Green Polishing Pad]

Description

Maxshine Mini Polisher System can be used in areas like car headlamps, fog lights, brake lights, door handles, emblems, scratch glass surfaces, interior console panels or small areas. Provide high-quality car care experiences when working on hard to reach areas where many polishers can’t do.

Where Maxshine Mini Polishing System Can Be Used

Where the Maxshine Mini Polishing System can be used: in areas like car headlamps, fog lights, brake lights, door handles, emblems, scratch glass surfaces, interior console panels or small areas. With the high quality material the system used, it can provide you with excellent polishing experiences.

SAFETY RULES AND INSTRUCTIONS USE AT YOUR OWN RISK


To properly attach the flexible shaft to the rotary tool Shut down the rotary polisher, make sure the power tool is completely stopped. Lock the rotary polisher’s shaft. Install the adaptor onto the output shaft of the polisher. Use a wrench to secure the adaptor. Release the lock on the rotary polisher.	Installing the flexible shaft to the adaptor Shut down the rotary polisher, making sure the power tool is completely stopped. Loosen the lock-nut on the adaptor with a wrench. Insert the flexible shaft into the center hole. Secure the lock-nut with a spanner. Turn the adaptor manually, to check and make sure it can be turned smoothly.	Dont to press the lock button on mini-polisher while the tool is running The cable will jam and may break, causing the loose cable to uncontrollably whip or lash around, which may result in personal injury. The shaft lock button on the hand piece is for changing the polishing accessories only, it can only be pressed while the tool is complete stopped.	Dont operate the flexible shaft with sharp or multiple bends Over bending the shaft can generate excessive heat and may cause premature failure. The maximum recommended bend radius is 6 inches. Always hold the mini polisher firmly in your hands during the start-up. During start-up, the initial torque of the motor may cause the hand-polisher to move.