Feature

●The OTC 6614 Heavy Duty Gear Puller will remove gears from 2 inches to 7-1/4 inches in diameter, including most cam gears
●Rated at 8 tons, this puller is stout enough for almost any heavy-duty application and includes a pair of metric bolts for most applications
●Slim cross block design gives more room to set up in tight quarters for increased versatiliity
●Tempered steel, rust inhibitor-coated 90mm long bolts are graded 10.9 and sized M12x1.75
●8 ton rated, 8-3/8 inch crossbar accepts up to 5/8 inch diameter bolts; sliding plates ensure smaller gear bolts, up to 1/2 inch diameter, are always centered; 5-3/4 inch long, 5/8-18, 3/4 inch drive forcing screw has a pulling reach of 3-1/4 inches


Description

OTCs 6614 Heavy Duty Gear Puller will remove gears up to 7-1/4" in diameter, including most cam gears. Rated at 8 tons, this puller is stout enough for almost any heavy-duty application and includes a pair of metric bolts for most applications. The slimmer design of the cross block gives more room to set up in tight quarters. The tempered steel, rust inhibitor-coated 90mm long bolts are graded 10.9 and sized M12x1.75. Features: 8-3/8" Crossbar rated to 8 Tons; Spread range: 2" to 7-1/4"; Accommodates bolts up to 5/8"diameter; Includes sliding plates to ensure smaller gear bolts, up to 1/2" diameter, are always centered; 5-3/4" long, 5/8-18, 3/4" drive forcing screw has a pulling reach of 3-1/4"; Treated to resist corrosion.