Package Includes: 13 pcs Adapter Drift sizes - 50mm, 55mm, 60mm, 64mm,67mm, 70mm, 72mm, 74mm, 75mm, 78mm, 82mm, 84mm, 88mm; 4 pcs Receiver Sleeves sizes - 102mm, 91mm, 86.3mm, 76mm; 2 pcs Drive Shaft sizes- 32mm and 38mm
|
How to Replace: - Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
- Step.2 Assemble the tool components, and press out the worn bearing.
- Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
- Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
- Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
- Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
|
Features: - Comes with all the tools you need to make removal and installation a breeze
- No requires for large electric machines, punches, rods or custom jigs and no need of the front end alignment
- Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance
- With plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
|