How to Setup:

1.Park your car in a safe area, and turn off the car engine; 2.Clean the windshield.

3.Take out the electrostatic sticker and install it in the recommended area on the windshield.

4.remove the air bubbles between the electrostatic sticker and the windshield during the installation.

5.Remove the protective sticker on the Dash Cam bracket and attach the Dash Cam to the center of the electrostatic sticker.

3" IPS Screen

The car dashcam comes with 3" IPS LCD display, clear and not obstruct your view of the road.

24H Parking Monitor & G-Sensor

Parking surveillance mode is when the car recorder detects a collision, it will automatically power on and record protected video. (This feature requires the use of a hardwire kit)

The car dash cam with a built-in adjustable G-Sensor, helps record better video. It quickly captures an emergency and automatically locks the footage.

OTA Firmware Update

Currently on the market, the way to upgrade the dashcam is to download the firmware to the memory card. Install the memory card into the recorder to boot up the firmware update, but the wrong process will lead to update failure！ After the update is complete, you will need to delete the firmware update file to avoid the hassle of running another firmware update the next time you boot up.

Zoom In

Although we are recording under 4K, sometimes you can’t see the details due to the mobile phone screen size. The Zoom In feature allows you to see more closely.

Frame by Frame Video Playback

Think your video is too long? If you only want to select the key videos, you can use the apps online editing function to save the key parts you want.