Feature

●🚘Fitment: 2013-2016 D-ODGE/C-HRYSLER/J-EEP/RAM 2.4L THROTTLE BODY OEM 04891970AB
●🚘 Interchange Part Number: 337-05509
●🚘FUNCTION: The throttle is a controllable valve that controls the intake flow of the engine and controls the entry of air into the engine to determine engine operating conditions.
●🚘ITEMCONDITION: 100% new, never remanufactured auto part meets OEM performance; the body of our actuator is crafted from reinforced material, with anticorrosion, heat resistance.
●🚘NOTE: Please use the compatibility chart below to double check if this throttle body will work for your car.


Description

throttle bodythrottle body

About HOWYAA Throttle Body

  • HOWYAA Electronic Throttle Body Assembly with IAC TPS 100% Brand New In Factory Original Package. Not refurbished or re-manufactured part. The electronic throttle unit opens and closes the throttle blade based on input from various engine control sensors, including the accelerator pedal.
  • Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear.
  • Notice: the item from factory with OEM quality, so the quality can be assured, if the product you received doesnt work, please help feedback.

HYVE0A Fitment:

CHEROKEE 13 throttle bodyCHEROKEE 13 throttle body

RENEGADE 15 throttle bodyRENEGADE 15 throttle body

throttle bodythrottle body

Nissan throttle body Fitment:

Chrysler 200 2015-2016 L4 2.4L DOHC Petrol

Chrysler 200 2015-2017 L4 2.4L SOHC Petrol with TPS Sensor

Dodge Dart 2013-2016 L4 2.4L DOHC Petrol with TPS Sensor

  • Dodge Dart 2013-2016 L4 2.4L SOHC Petrol with TPS Sensor
  • Fiat 500X 2016-2018 L4 2.4L SOHC Petrol
  • Jeep Cherokee 2014-2019 L4 2.4L SOHC Petrol
  • Jeep Compass 2017-2020 L4 2.4L SOHC Petrol
  • Jeep Renegade 2015-2018 L4 2.4L SOHC Flex
  • Jeep Renegade 2015-2020 L4 2.4L SOHC Petrol
  • Ram ProMaster City 2015-2020 L4 2.4L SOHC Petrol

Specifications for Sentra throttle body

  • Color/Finish: Gray, Black
  • Throttle Body Material: Aluminum
  • Connector/Terminal Type: Blade
  • Fitment Direct: Replacement
  • Throttle Body Actuation Type: Electric

Details:

  • Package： 1 x Fuel Injection Throttle Body
  • Brand New Electronic Throttle Body Assembly
  • Items Included: One Complete Throttle Body w/Sensor
  • 100% electrically tested prior to leaving the factory
  • Direct replacement
  • Built to strict quality control standards
HOWYAAHOWYAA

HOWYAAHOWYAA
Description:

  • 100% Brand New
  • Direct Replacement 100% factory new.
  • Built to strict quality control standards
  • Direct replace Professional Installation is Highly Recommended

  • Please confirm the part number and vehicle models before order.

Specification

  • 1. Brand New Fuel Injection Throttle Body for 2005-2012 Ram 1500 2500 3500 Pickup,2005-2009 Durango 2007-2009 Aspen
  • 2. Part Number: 67-7014, 4891970AB, 4891970AC, 04891970AB,
  • 4. Replace for OEM number: #04891970AC, 337-05509, 677014
  • Notice: the throttle body from factory with OEM quality, so the quality can be assured

  • Package Includes: 1 x Throttle Body as pictured
  • 4891970AB,4891970AC,04891970AB,04891970AC
  • This is a compatible replacement part manufactured by HOWYAA.
  • This throttle body is NOT a genuine part. Vehicle makes and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this throttle body fits.

Install Steps:

  • Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
  • Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.
  • way open by hand and then removing the now slackened cables from the throttle lever.
  • Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.
  • Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate ¼-inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.

Product information