Feature

●🚘Fitment: Throttle Body 53032837AA for 2008-2013 D-akota D-urango Nitro Ram 1500
●🚘Interchange Part Number: 67-7010 S20188 TB1180 53032837AA. please check your throttle body is same it.
●🚘FUNCTION: The throttle is a controllable valve that controls the intake flow of the engine and controls the entry of air into the engine to determine engine operating conditions.
●🚘ITEMCONDITION: 100% new, never remanufactured auto part meets OEM performance; the body of our actuator is crafted from reinforced material, with anticorrosion, heat resistance.
●🚘NOTE: Please use the compatibility chart below to double check if this throttle body will work for your car.


Description

throttle bodythrottle body

About HOWYAA Throttle Body

  • HOWYAA Electronic Throttle Body Assembly with IAC TPS 100% Brand New In Factory Original Package. Not refurbished or re-manufactured part. The electronic throttle unit opens and closes the throttle blade based on input from various engine control sensors, including the accelerator pedal.
  • Function:Electronic throttle is the throttle pedal and throttle between the traditional cable link, but through electronic sensors to control, control accuracy is higher, to improve the throttle hysteresis phenomenon.frequently requires replacement as internal electronic sensor failure and excessive wear and tear.
  • Notice: the item from factory with OEM quality, so the quality can be assured, if the product you received doesnt work, please help feedback.

Durango Nitro Ram 1500 throttle bodyDurango Nitro Ram 1500 throttle body

Durango Nitro Ram 1500 throttle bodyDurango Nitro Ram 1500 throttle body
Description:

  • 100% Brand New
  • Direct Replacement 100% factory new.
  • Built to strict quality control standards
  • Direct replace Professional Installation is Highly Recommended

  • Please confirm the part number and vehicle models before order.

Specification

  • 1. Brand New Throttle Body for 2008-2014 Chrysler Aspen Dodge Dakota Durango Ram 1500
  • 2. Part Number: 3032837AA
  • 4. Replace for OEM number: #67-7010 S20188 TB1180
  • Notice: the throttle body from factory with OEM quality, so the quality can be assured

  • Package Includes: 1 x Throttle Body as pictured
  • 67-7010 S20188 TB1180
  • This is a compatible replacement part manufactured by HOWYAA.
  • This throttle body is NOT a genuine part. Vehicle makes and their associated vehicle models and part numbers are used in this listing only to identify the vehicles this throttle body fits.

FITMENT:

  • CHRYSLER ASPEN 2008-2009
  • DODGE DAKOTA 2008-2010
  • DODGE DURANGO 2008-2009
  • DODGE RAM 1500 PICKUP 2008-2010
  • DODGE VIPER 2008-2010
  • JEEP COMMANDER 2008-2009
  • JEEP GRAND CHEROKEE 2008-2009
  • RAM 1500 2011-2013
  • RAM DAKOTA 2011
  • SRT VIPER 2013-2014

Install Steps:

  • Remove the air cleaner and duct hose assembly using the common screwdriver. Disconnect the electrical connector on the mass air flow by pulling out the plug. Disconnect the intake air temperature sensor found in the air duct.
  • Disconnect the idle air control on the side of the throttle body by pulling the electrical connector out. Disconnect the throttle position sensor opposite the throttle cable levers.
  • way open by hand and then removing the now slackened cables from the throttle lever.
  • Remove the heated water hoses from the bottom of the throttle body if there are any (this is vehicle dependent). Use the needle nose pliers to remove the clamps by squeezing the clamps and pulling them off. Pull the hoses off. Not all vehicles have these, although there are a few that do.
  • Remove the four bolts running through the throttle body and into the intake manifold. Use appropriate ¼-inch drive socket and ratchet. Lift the throttle body off the intake manifold. Protect the metal gasket that is in between the throttle body and intake. This gasket must be reused. Install the new throttle body and components in reverse order of removal.

Aboout HOWYAA factory

HOWYAa throttle bodyHOWYAa throttle body

throttle body throttle body

throttle dodythrottle dody

HOWYAAHOWYAA

Produce Machine

  • Video Measuring Machine
  • Three-coordinate Measuring
  • Torsion Tester

Item Offerd

management,enterprise form a unique production process,one-flow production through finish machining,punching press,injection,assembly,etc.,ensure company full realization of “high efficiency”, “high precision” and “high productivity”,and with solid manufacturing capability provide customers convenient and immediate product requirements.

Product Storefront

There are Updated Technoloy,Expanded Applicability,Longer lift time, Strong Stability.

All are Through dynamic high and low temperature test,thermal shock,endurance test,salt spray test,vibration test and loading test in the car to insure the reliability of our new products.

HOWYAA

Zhejiang HOWYAA Electronic Control System Co.,Ltd. was founded in 1983,

HOWYAA is a hightech enterprise focusing on the R&D, production and sales of engine management system products,the companys main products related to switches, sensors, idle air control valves, electronic throttle bodies.

Product information