Description: This camera control cable is used to connect your camera to the Camera Control Port of for DJI RSC 2 for camera control. Support photo, video, focusing, pan-shot and app time-lapse photography function. Specification: Material: PVC Total Length: 34.5cm(manual measurement, with 1-2cm tolerances). OD: 2.0mm Type: Double elbows control cable Function: photo, video, focusing, pan-shot and app time-lapse photography Suitable for: Stabilizer: for DJI Ronin SC, RSC2, RS2, RS3 Camera: for Canon 80D, 70D, 60D, 77D, 700D, 800D, 760D, 750D, 650D, 600D, 550D, 450D, 400D, 350D, 300D, 200D, 100D, 1000D, 1100D, 1300D, 1500D, G10, G12, G1, SX50, SX60HS, M5, M6, EOS R; for Pentax K5, K5II, K7, K30, K10D, K20D, K100, K200, 645D; for Fujifilm X-H2S, XT2, XT3, XT4, XT20, XT30, XT30Ⅱ, XE1, XE2, XE2S, XA3, XE3, XA5, XA7, XH1,X-PR02/03, GFX50S/50R/100S, X100V, X100F. Note: The functions depend on camera and stabilizer both, not our product. Such as 80D/77D/800D/M6, they support Recording Function but not allow TRACK. Only shutter functions may work with old cameras. How to use: When it is connected to FUJI camera: 1. Set “PC Connection mode" to “USB Auto". The specific setting method is as follows: Select “Menu”- select “Settings”- Select “Connection Settings”- “PC Connection mode”- “USB automatic mode”. 2. The camera button function is not supported during the connection. If you need to use the camera button function, ensure that the holder is turn off. 3. After completing the cable connection, turn on the stabilizer, then turn on the camera. If the camera is not recognized, restart the camera or remove and reconnect the cable to the camera. Package included: 1pc* control cable for DJI Ronin SC-E3(Type-C to TRS2.5mm)