Arlington trade; LVN1 Nail-On Low Voltage Mounting Bracket, Single Gang Arlington Industries LVN1 Low Voltage Mounting Bracket features shallow mounting depth which allows for more wires to be run in the wall cavities. The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage. Arlington Industries has also designed their new construction brackets to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth. IMPORTANT: For Low Voltage Class 2 Use Only Single Gang Open Back Bracket Commonly Referred to as a Mud Ring For New Construction Applications Run More Wire Easier with Brackets vs Boxes Mounts to Wood Studs with Supplied Nails Impact Resistant Plastic results in less breakage on Job site Flange around box supports sheetrock Front Nail Holes for added box support Integrated Cable Tie-Off Loop to Hold Cables behind Box Shallow Mount - Only 0.55 Deep (Not Including Stud Side Nail Flange)Minimum Sheetrock or Panel Thickness - 0.45Side Wall Thickness - 0.080Nailing Flange Thickness - 0.090 (Front and Side)Panel Cut Out Dimensions - 2.15 W x 3.60 Overall Dimensions - 3.14 W x 5.34 H x 1.61 Depth Installation The LVN1 Mounting Bracket comes complete with captive nails. All you need is a hammer, and you are ready to install. Also, it features a built-in loop for tying off a cable. It even doubles as its own cut-out template! All in all, the nail-on bracket installs in 25% less time than steel or plastic mud rings - and costs less, too. What more, pushback is eliminated with the use of these brackets.