●Disconnect the power source to ensure safety.
●Remove the old motor assembly, typically by unscrewing the securing screws and gently pulling it out.
●Disconnect the power harness from the old motor assembly.
●If the new motor assembly doesnt come with the impeller installed, mount the impeller onto the new motor assembly. Ensure the impeller aligns with the motor shaft.
●Connect the power harness of the new motor assembly to the power harness, ensuring a secure and correct connection.
●Insert the new motor assembly into the fan casing, ensuring alignment with the mounting holes.
●Secure the new motor assembly in place using the provided screws or other fasteners. Ensure the fasteners are tight to prevent movement of the motor assembly.
●Check all connections to ensure proper and secure installation.
●Reconnect the power source, turn on the power switch, and test if the new motor assembly operates properly.
During the installation process, handle with care, ensuring each step is correctly to ensure safety and correctness.