Feature(may vary by option.)
●6 DIY keys, you adjust the R/G/B color freely. Infrared remote control, very easy to control LED RGB light strip.
●Adjust brightness, turn lights on or off, 16 multicolored options, 5 light patterns: Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
●LED light remote are 20 colors and 5 light pattern, Static/Flash/Strobe/Fade-change/RGB Smooth-change. Easy for you to turn ON/OFF strip lights, DIY colors as you like and adjust brightness.
●Remote control doesn’t work. First, pull out the plastil piece before use(see Figure 6). When used, the remote control must be aligned with the indicating sensor (see picture 7).If the remote control still does not work, please take out the battery and reinstall it (the battery may have moved during transportation)-(see Figure 6).
●If the buttons dont control the right colors. First, you can press the remote control switch button , turn off the light strip.Then press the FADE7 button（the last button below the right）, The light strip will flash.Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps until the button can control the correct color.If not, repeat the above steps.
●The remote control is compatible with 5050 2835 3528 model led light strips. If the remote control still does not work, please contact us. We will handle the corresponding issues based on your specific situation.
[44 key remote]
[1 remote]
Description
44 key IR Remote Controller: Color: 20 Colors
8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpychange R / G / B increase and decrease control
44 keys infrared controller which has 6 keys(DIY keys) for momories the colors what you preferred
Package Quantity: 1 x 44Key Remote
NOTE! ! !
If the buttons dont control the right colors. First, you can press the remote control switch button , turn off the light strip. Then press the FADE7 button（the last button below the right）, The light strip will flash. Then press the switch button to turn on the light strip, the buttons can control the correct color. If not, repeat the above steps until the button can control the correct color. If you can end the operation.
Remote control doesn’t work. First, pull out the plastil piece before use. Then connect ir controller with led strip, it doesn’t work, disconnect the strip bar, reverse link. If the remote control still does not work, contact us to change a new one please.